Skip to the content
2 layersTft controller, the printed circuit board in 3D

Tft controller

aviaplana/VanDash

Dashboard to monitor my campervan

Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
18
Pads
54
Tracks, vias
120, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Jul 2025
Updated
14 Jul 2025

Overview

Tft controller is an open-source printed circuit board by aviaplana, from the aviaplana/VanDash repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 13 parts on 18 nets, routed with 120 tracks and 0 vias.

It is built around the WEMOS D1 MINI. Its parts include 1 capacitor and 1 switch. It belongs with the ESP8266 boards of this library.

Main components

1

README

README.md

Project Overview

This project is designed to monitor the water tank levels and temperature/humidity inside a campervan. It is structured into two main components:

Dashboard Unit

Responsible for receiving sensor data and displaying it to the user.

Environment Tanks


Sensor Unit

Gathers environmental and tank data and transmits it to the dashboard unit.

Board


Both units are developed using PlatformIO. Each has a custom KiCad schematic, which can be found in the /schemes directory.

Parts

13
QtyValueFootprintReferences
1C_Polarized_SmallCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalPowerInput1
1HDC1080Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalHDC1080
1LOGOfurgo:furgo_smallG***
1Mini360_ModuleCharleslabs_Parts:Mini360_ModuleMini360
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutNRF24L1
1SW_PushButton_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243SW1
1TFTConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalTFT1
1WeMos_D1_miniModule:WEMOS_D1_mini_lightWeMos_D1_mini1

The 9 most common of 13 parts.

More from aviaplana/VanDash

1
  • 2 layers58 × 48 mmSensors furgo, the printed circuit board in 3D

    Sensors furgo

    aviaplana/VanDash

    Dashboard to monitor my campervan

    15 partsGPL-3.0

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers32.1 × 40.8 mmPower Monitor Version 1, the printed circuit board in 3D

    Power Monitor Version 1

    alcar21/WemosEM

    Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

    8 parts122
  • 2 layers91 × 49 mmWled, the printed circuit board in 3D

    Wled

    wladwnt/wled

    Simple WLED Board (SW: https://github.com/Aircoookie/WLED)

    9 parts102
  • 2 layers97.5 × 59.3 mmControl Board, the printed circuit board in 3D

    Control Board

    kholia/Easy-Digital-Beacons-v1

    A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

    17 parts89
  • 2 layers64.6 × 36.9 mmNavien latest, the printed circuit board in 3D

    Navien latest

    htumanyan/navien

    Navien water heater wire protocol for communication with NaviLink and other attached devices

    30 parts65
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layersTcsmonitor pcb, the printed circuit board in 3D

    Tcsmonitor pcb

    Syralist/tcs-monitor

    ein Bus-Monitor für TCS Klingelanlagen

    14 parts37MIT

Questions

What parts does the Tft controller use?

13 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tft controller KiCad files?

From the aviaplana/VanDash repository on GitHub, at the commit this page was made from: the board is dashboard/hardware/schemes/tft_controller.kicad_pcb and its schematic dashboard/hardware/schemes/tft_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tft controller design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).