Skip to the content
2 layers58 × 48 mmSensors furgo, the printed circuit board in 3D

Sensors furgo

aviaplana/VanDash

Dashboard to monitor my campervan

Size
58 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
32
Pads
71
Tracks, vias
92, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Jul 2025
Updated
14 Jul 2025

Overview

Sensors furgo is an open-source printed circuit board by aviaplana, from the aviaplana/VanDash repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58 × 48 mm with 15 parts on 32 nets, routed with 92 tracks and 0 vias.

It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Project Overview

This project is designed to monitor the water tank levels and temperature/humidity inside a campervan. It is structured into two main components:

Dashboard Unit

Responsible for receiving sensor data and displaying it to the user.

Environment Tanks


Sensor Unit

Gathers environmental and tank data and transmits it to the dashboard unit.

Board


Both units are developed using PlatformIO. Each has a custom KiCad schematic, which can be found in the /schemes directory.

Parts

15
QtyValueFootprintReferences
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_VerticalR1
1Arduino_Nano_v2.xModule:Arduino_NanoArduinoNano1
1C_PolarizedCapacitor_THT:CP_Radial_D4.0mm_P2.00mmNRF_C1
1External weatherConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalExternalSensor
1Fresh waterConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalFreshTank
1Gray waterConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalGrayTank
1LOGOfurgo:furgo_smallG***
1Mini360_ModuleCharleslabs_Parts:Mini360_ModuleMini
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutNRF24L1
1Power inputConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalPowerInput
1hdc1080Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalInternalSensor

The 11 most common of 15 parts.

More from aviaplana/VanDash

1
  • 2 layersTft controller, the printed circuit board in 3D

    Tft controller

    aviaplana/VanDash

    Dashboard to monitor my campervan

    13 partsGPL-3.0

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Sensors furgo PCB?

It measures 58 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sensors furgo use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensors furgo KiCad files?

From the aviaplana/VanDash repository on GitHub, at the commit this page was made from: the board is sensors/hardware/schemes/sensors_furgo.kicad_pcb and its schematic dashboard/hardware/schemes/tft_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensors furgo design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).