

Ethernet
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 89
- Pads
- 241
- Tracks, vias
- 583, 72
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Jun 2021
- Updated
- 7 Nov 2026
Overview
Ethernet is an open-source printed circuit board by avg67, from the avg67/nkc repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 32 parts on 89 nets, routed with 583 tracks and 72 vias.
It is built around the 74LVC245AD, 74LS32SC and BC547, with the BC557 among its other parts. Its parts include 12 capacitors, 7 ICs, 5 connectors, 3 resistors and 2 transistors. It belongs with the interfaces and adapters boards of this library.
Main components
474LVC245AD
SOIC-20-300mil-40℃~+125℃ 1 1.65V~3.6V 2.9ns@3.3V,50pF 24mA 40uA 74LVC 8 Bidirectional Schmitt trigger Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic GatesBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdnkc
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C7, C8, C9, C10, C11 |
| 3 | 74LVC245 | Housings_DIP:DIP-20_W7.62mm_LongPads | IC3, IC4, IC5 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C6, C12 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 1 | 10µF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1k | Resistor_THT:R_Array_SIP9 | RN2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 4k7 | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | 74LS32 | Housings_DIP:DIP-14_W7.62mm_LongPads | IC1 |
| 1 | 74LS688 | Housings_DIP:DIP-20_W7.62mm_LongPads | IC2 |
| 1 | A0_Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | BC557 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q2 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | LT1086-3.3 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
| 1 | NKC-Bus | mylib:PinHeader_1x36_P2.54mm_Horizontal | J1 |
| 1 | SBHE_Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | ~ | mylib:Olimex CS8900A-H | U2 |
More from avg67/nkc
1- 2 layers160 × 100.3 mm

Similar boards
- 2 layers89.5 × 77.5 mm

Apple2-IO RPi
tjboldt/Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O
24 parts140MIT - 2 layers89.5 × 77.5 mm

- 2 layers58.2 × 86.4 mm

- 2 layers232.8 × 204.2 mm

- 2 layers51 × 38 mm

N2Graphics
codesqueak/SmallElectronicsProjects
A collection of small projects that can be grouped together
14 parts1 - 2 layers56 × 65 mm

SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers148.8 × 132.2 mm

Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers83.8 × 72.4 mm

Questions
How big is the Ethernet PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ethernet use?
32 parts, built around the 74LVC245AD, 74LS32SC, BC547 and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet KiCad files?
From the avg67/nkc repository on GitHub, at the commit this page was made from: the board is KiCad/Ethernet/ethernet.kicad_pcb and its schematic KiCad/Ethernet/ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).