

Pmodmics
Phased array sonar project
- Size
- 120 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 27
- Pads
- 174
- Tracks, vias
- 370, 411
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Mar 2026
- Updated
- 20 Aug 2026
Overview
Pmodmics is an open-source printed circuit board by atx, from the atx/phased repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 120 × 20.3 mm with 47 parts on 27 nets, routed with 370 tracks and 411 vias.
It is built around the SN74LVC1G125DCK, LMD3526B261-OA5 and SRV05-4. Its parts include 15 resistors, 15 ICs, 14 capacitors, 1 diode and 1 connector.
Main components
3SN74LVC1G125DCK
SC-70-5-40℃~+125℃ 0.6ns@3.3V,15pF 1 1 1.65V~5.5V 10uA 32mA 32mA 74LVC Tri-State Unidirectional SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversLMD3526B261-OA5
SMD-5P,3.5x2.7mmSMD-5P,3.5x2.7mm MEMS Microphones ROHSLinkMemsMEMS MicrophonesSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdphased
Random experiments with microphone phased arrays
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 22 | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R7, R9, R10, R11, R12, R13, R14, R15, R16 |
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 12 | LMD3526B261-OA5 | footprints:LMD3526B261-OA5 | U1, U2, U4, U5, U6, U7, U8, U9, U10, U11, U12, U15 |
| 2 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U13, U14 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | CLK | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | PMOD | footprints:PMOD_2x06 | J1 |
| 1 | SN74LVC1G125DCK | Package_TO_SOT_SMD:Texas_R-PDSO-G5_DCK-5 | U3 |
More from atx/phased
1- 2 layers79.5 × 36.2 mm

Similar boards
- 4 layers48.5 × 33.5 mm

- 4 layers60 × 107 mm

Clock sync 16
AllenNeuralDynamics/harp.device.white-rabbit
0361: A 16-output Harp clock synchronizer
172 parts1 - 4 layers127 × 101.6 mm

- 2 layers35 × 35 mm

DuplexUARTtoHalf
freudenthal/DuplexToHalfUART
A single PCB to convert full duplex (RX, TX) to half duplex (only 'data') for controlling UART serial servos.
29 parts - 4 layers221.5 × 130.8 mm

MEP MAXI-85V-1-REV-2-Interface Board
JGilcreast/MetalHead
An opensource firmware and software drop-in replacement for the 85V Automatic Stirrup Bender by CRS Specialties Inc. ...short story behind the name...
407 parts - 2 layers101.6 × 53.4 mm

- 2 layers64.8 × 74.5 mm

ReadingLampController
vsi5004/ReadingLampController
A repurposing of my LCC Lighting Controller hardware into a customizable, Matter enabled, RGBW reading lamp
67 parts - 2 layers77 × 102.7 mm

S16R4
Zannden/numpad
This repository contains PCB and 3D model files for a wireless programmable numpad design by me.
102 partsMIT
Questions
How big is the Pmodmics PCB?
It measures 120 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmodmics use?
47 parts, built around the SN74LVC1G125DCK, LMD3526B261-OA5 and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmodmics KiCad files?
From the atx/phased repository on GitHub, at the commit this page was made from: the board is pcb/pmodmics/pmodmics.kicad_pcb and its schematic pcb/interferometer/interferometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmodmics design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).