
DC Motor Speed Controller
atulkumarjan2000-cloud/KiCad-PCB-Projects
A collection of my KiCad Schematic, PCB design, Gerber and hardware projects

A collection of my KiCad Schematic, PCB design, Gerber and hardware projects
8 channel Relay module using ULN2803 is an open-source printed circuit board by atulkumarjan2000-cloud, from the atulkumarjan2000-cloud/KiCad-PCB-Projects repository on GitHub. It is a 2-layer board of 85 × 99 mm with 68 parts on 60 nets, routed with 244 tracks and 14 vias.
It is built around the ULN2803A. Its parts include 25 resistors, 17 diodes, 10 connectors, 9 switches and 2 capacitors. It belongs with the home automation and IoT boards of this library.
A custom DC Motor Speed Controller PCB designed using KiCad.
This project contains the schematic and PCB design for controlling the speed of a DC motor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 9 | 680E | Resistor_SMD:R_0805_2012Metric | R1, R18, R19, R20, R21, R22, R23, R24, R25 |
| 9 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D4, D6, D8, D10, D12, D14, D16 |
| 8 | Conn_01x03_Pin | Connector_JST:JST_NV_B03P-NV_1x03_P5.00mm_Vertical | J3, J4, J5, J6, J7, J8, J9, J10 |
| 8 | D | Diode_SMD:D_1206_3216Metric | D3, D5, D7, D9, D11, D13, D15, D17 |
| 8 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1, K2, K3, K4, K5, K6, K7, K8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H5, H6, H7, H8 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | POWER | Connector_JST:JST_NV_B02P-NV_1x02_P5.00mm_Vertical | J1 |
| 1 | ULN2803A | ULN2803A:DIP850W46P254L2324H393Q18 | U1 |
| 1 | ~ | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin | SW1 |

atulkumarjan2000-cloud/KiCad-PCB-Projects
A collection of my KiCad Schematic, PCB design, Gerber and hardware projects

atulkumarjan2000-cloud/KiCad-PCB-Projects
A collection of my KiCad Schematic, PCB design, Gerber and hardware projects

atulkumarjan2000-cloud/KiCad-PCB-Projects
A collection of my KiCad Schematic, PCB design, Gerber and hardware projects

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters


crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.




It measures 85 × 99 mm and has 2 copper layers, 1.6 mm thick.
68 parts, built around the ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the atulkumarjan2000-cloud/KiCad-PCB-Projects repository on GitHub, at the commit this page was made from: the board is 05-8-Channel-Relay-Module-ULN2803A/8 channel Relay module using ULN2803.kicad_pcb and its schematic 01-DC-DC-Boost-Converter/Boost converter V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask atulkumarjan2000-cloud before reusing the design.