Skip to the content
2 layers94.5 × 35 mmUSB LED Ring, the printed circuit board in 3D

USB LED Ring

atuleu/aristeus

Yet another Open Source Hardware Apiary project for monitoring bees.

Size
94.5 × 35 mm
Copper layers
2
Thickness
1 mm
Parts
91
Nets
91
Pads
269
Tracks, vias
228, 64
Pours
17
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 May 2026
Updated
7 Oct 2026

Overview

USB LED Ring is an open-source printed circuit board by atuleu, from the atuleu/aristeus repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 94.5 × 35 mm with 91 parts on 91 nets, routed with 228 tracks and 64 vias.

It is built around the RP2354A, TPS923610DRL and TLV75733PDBV, with the CL05B104KO5NNN, CL21B225KBYNNWE and GRM188Z71A475ME15D among its other parts. Its parts include 24 diodes, 21 capacitors, 11 resistors, 4 ICs and 4 connectors. It belongs with the RP2350 boards of this library.

Main components

12

Parts

91
QtyValueFootprintReferences
24LEDcustom:158301250D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8
10100nCapacitor_SMD:C_0402_1005MetricC2, C8, C9, C13, C14, C15, C16, C17, C18, C19
6RCUCTEcustom:RCUCTETP1, TP2, TP3, TP4, TP5, TP6
32u2Capacitor_SMD:C_0805_2012MetricC3, C4, C5
34u7Capacitor_SMD:C_0603_1608MetricC10, C11, C12
215pCapacitor_SMD:C_0402_1005MetricC6, C7
21kResistor_SMD:R_0402_1005MetricR3, R4
227Resistor_SMD:R_0402_1005MetricR5, R6
247kResistor_SMD:R_0402_1005MetricR9, R11
24u7Capacitor_SMD:C_0805_2012MetricC1, C20
2CK_KMS2xxGcustom:SW_SPST_CK_KMS2xxGPBTN1, BTN2
2JST SH 3 VertConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ1, J3
1.100Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1100mResistor_SMD:R_0603_1608MetricR2
1130kResistor_SMD:R_0402_1005MetricR10
11nCapacitor_SMD:C_0402_1005MetricC21
12.55Resistor_SMD:R_0603_1608MetricR1
1220nLED_SMD:LED_0805_2012MetricL3
122ucustom:L_Bourns-SRN3015L1
13u3custom:L_Abracon_AOTAL2
1430kResistor_SMD:R_0402_1005MetricR8
16k8Resistor_SMD:R_0402_1005MetricR7
1ABM8-272-T3Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1G***kibuzzard-6A11723Akibuzzard-6A11723A
1G***kibuzzard-6A15B6D3kibuzzard-6A15B6D3
1G***kibuzzard-69FB6788kibuzzard-69FB6788
1G***kibuzzard-69FB6831kibuzzard-69FB6831
1G***kibuzzard-6A15B584kibuzzard-6A15B584
1G***kibuzzard-69FB681Akibuzzard-69FB681A
1G***kibuzzard-69FC837Bkibuzzard-69FC837B
1G***kibuzzard-6A15B5C8kibuzzard-6A15B5C8
1G***kibuzzard-6A117223kibuzzard-6A117223
1G***kibuzzard-69FB677Ckibuzzard-69FB677C
1G***kibuzzard-6A15B60Akibuzzard-6A15B60A
1G***kibuzzard-6A15B5E0kibuzzard-6A15B5E0
1G***kibuzzard-69FB6775kibuzzard-69FB6775
1RP2354Acustom:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalViasU3
1TLV75733PDBVPackage_TO_SOT_SMD:SOT-23-5U2
1TPS25947xxcustom:Texas_RPW_VQFN-HR-10_2.1x2.1mm_P0.475mmU4
1TPS923610Package_TO_SOT_SMD:SOT-563U1
1USB_B_Microcustom:USB_Micro-B_Molex-105017-0001J2

The 89 most common of 91 parts.

More from atuleu/aristeus

6
  • 2 layers46 × 69.5 mmPannel, the printed circuit board in 3D

    Pannel

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    108 partsCERN-OHL-S-2.0
  • 2 layers68 × 32 mmScale bridge, the printed circuit board in 3D

    Scale bridge

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    37 partsCERN-OHL-S-2.0
  • 2 layers65 × 30 mmRpi uHAT, the printed circuit board in 3D

    Rpi uHAT

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    35 partsCERN-OHL-S-2.0
  • 2 layers54.5 × 28 mmBLE environmental sensor, the printed circuit board in 3D

    BLE environmental sensor

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    30 partsCERN-OHL-S-2.0
  • 2 layers10 × 50 mmTunnel IR barrier, the printed circuit board in 3D

    Tunnel IR barrier

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    23 partsCERN-OHL-S-2.0
  • 2 layers30 × 17 mmHive environmental sensor, the printed circuit board in 3D

    Hive environmental sensor

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    13 partsCERN-OHL-S-2.0

Similar boards

  • 6 layers139.7 × 88.9 mmIMX6-BareBones, the printed circuit board in 3D

    IMX6-BareBones

    a1wolfe/iMX6-BareBones

    i.MX 6ULL Open Source Development Board

    558 parts
  • 2 layers160 × 100 mmPm6V, the printed circuit board in 3D

    Pm6V

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    64 parts
  • 2 layers76.5 × 63.5 mmSide main psu, the printed circuit board in 3D

    Side main psu

    suzizecat/defissolaire-v4

    Repository for Défis Solaires Electronic V4

    46 parts
  • 2 layersAll Lit Up, the printed circuit board in 3D

    All Lit Up

    ruralguru/all_lit_up_coaster

    LED coaster design,

    85 parts
  • 2 layers135.1 × 159.4 mmBMS Master, the printed circuit board in 3D

    BMS Master

    UCDFS/Circuits

    KiCad projects and PCB designs for UCDFS electronic circuits.

    220 parts1
  • 4 layers27.9 × 63.5 mmPico2-ice, the printed circuit board in 3D

    Pico2-ice

    tinyvision-ai-inc/pico2-ice

    Doc | Hardware | SDK | Schematic | Assembly | Discord

    124 parts60MIT
  • 2 layers54 × 85.6 mmBoard43, the printed circuit board in 3D

    Board43

    smartbank-inc/Board43

    Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.

    583 parts30

Questions

How big is the USB LED Ring PCB?

It measures 94.5 × 35 mm and has 2 copper layers, 1 mm thick.

What parts does the USB LED Ring use?

91 parts, built around the RP2354A, TPS923610DRL, TLV75733PDBV and CL05B104KO5NNN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB LED Ring KiCad files?

From the atuleu/aristeus repository on GitHub, at the commit this page was made from: the board is devices/USB_LED_Ring/USB_LED_Ring.kicad_pcb and its schematic devices/BLE_environmental-sensor/BLE_environmental-sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB LED Ring design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).