4 layers60 × 60 mm
Rocket payload
Gupatron/Gupsfirstpcb
This is the first pcb that I will manufacture and intend to use for teleop usecases in my personal projects.
138 parts
4 layers67.4 × 64 mm
FC InSpace Edits
attenuatoriit/Avionics_RaSET- Size
- 67.4 × 64 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 84
- Nets
- 113
- Pads
- 361
- Tracks, vias
- 791, 161
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Oct 2024
- Updated
- 22 Mar 2026
Overview
FC InSpace Edits is an open-source printed circuit board by attenuatoriit, from the attenuatoriit/Avionics_RaSET repository on GitHub. It is a 4-layer board of 67.4 × 64 mm with 84 parts on 113 nets, routed with 791 tracks and 161 vias.
It is built around the ZOE-M8Q-0, BMP390L and W25Q128JVSIQ, with the AMS1117-3.3, AMS1117-5.0 and BNO055 among its other parts. Its parts include 24 capacitors, 16 connectors, 11 resistors, 9 ICs and 2 inductors. It belongs with the STM32 boards of this library.
Main components
7
ZOE-M8Q-0
SMD-51P-160dBm -40℃~+85℃ 2.7V~3.6V Dual-band / multi-band positioning GPS、BeiDou、Galileo、GLONASS UART、I2C、SPI SMD-51P GNSS Modules ROHSu-bloxGNSS Modules
BMP390L
LGA-10(2x2x0.5)-40℃~+85℃ 0.6pa/K 1.4uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI On-chip temperature compensation、Integrated ADC and digital interface、Standby mode、On-chip temperature output LGA-10(2x2x0.5) Pressure Sensors ROHSBosch SensortecPressure Sensors
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
U.FL-R-SMT-1(01)
SMD-40℃~+90℃ 1 1.25mm 2mm 50Ω 6GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHSHirose ElectricCoaxial Connectors (RF)
README
README.mdAvionics_RaSET
This repository encompasses all the updates regarding the rocket avionics (MaxQ) that has beendeveloped in house by the IIT Kanpur Rocketry and Space Exploration Team. The avionics has been designed keeping in mind Space Port America Cup 10k SRAD category. There are mainly three main components of the avionics - flight computer, arming switch and telemetry. The flight computer encompasses the ltimeter, IMU, micro controller and GPS. It also has ports to support to different telemetry devices- Xbee and LoRA. The use of a micro processor is being planned on the flight computer in ot=rder to facilitate the implementation of trajectory plnning of the rocket during its flight.
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | optional1, pull-up1, R1, R15, R16, R17, R18, R19, R20, Rpull1, Rpull2 |
| 6 | 100n | 0.1 uF:CAP_CL21_SAM | C13, C14, C15, C17, C18, C25 |
| 6 | Headers 3x1 FC | Headers 3x1 FC:61300311121 | J3, J13, J14, J15, J16, J17 |
| 4 | 100nF | 0.1 uF:CAP_CL21_SAM | C5, C6, C9, C12 |
| 4 | 22u | 22 uF:G-188_MUR | C1, C2, C3, C4 |
| 3 | Headers 5x1 FC | Headers 5x1 FC:61300511121 | J6, J11, J12 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 130 | Resistor_SMD:R_1206_3216Metric | R8, R9 |
| 2 | 1u | 1 uF:CAP_1608_TDK | C21, C22 |
| 2 | 20 | Resistor_SMD:R_0805_2012Metric | R6, R10 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | NMOS | NMOS FC:SOT95P285X130-3N | IC1, IC2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J8, J9 |
| 1 | 0.1 uF | 0.1 uF:CAP_CL21_SAM | C10 |
| 1 | 1.5k | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 10 | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | 10n | 10nF:WCAP-CSMH_0603_R | C20 |
| 1 | 10u | 10uf_FC:CAPC2012X135N | C16 |
| 1 | 120R | 120R_Ferrite Bead_FC:BEADC1608X75N | FB1 |
| 1 | 120nF | 120 nF:CAP_CC0402_YAG | C8 |
| 1 | 150 | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 2.2 uH | 2.2uH:IND_VLS252012HBX-2R2M-1 | L1 |
| 1 | 4.7 uF | 4.7 uF:CAP_CL10_SAM | C23 |
| 1 | 4.7u | 4.7 uF:CAP_CL10_SAM | C19 |
| 1 | 47 pF | 47 pF:G-155_MUR | C24 |
| 1 | 6.8nF | 6.8 nF:CAP_1608_TDK | C7 |
| 1 | AMS1117-3.3 | Voltage_Regulator_AMS1117-3.3:SOT229P700X180-4N | U2 |
| 1 | AMS1117-5.0 | AMS1117-5.0:SOT229P700X180-4N | U3 |
| 1 | BMP390L | BMP390L (1):XDCR_BMP390L | U6 |
| 1 | BNO055 | BNO055:LGA28R50P4X10_380X520X100 | U4 |
| 1 | Buzzer | Buzzer FC:CUI_CSS-0575B-SMT | BZ1 |
| 1 | CLV1L-FKB | LED_SMD:LED_Cree-PLCC4_3.2x2.8mm_CCW | D1 |
| 1 | Headers ST-Link | Headers 6x1 FC:61300611121 | J4 |
| 1 | LOGO | Dweep Sign:Dweep Sign | G*** |
| 1 | LOGO | LOGOPCB:LOGOPCB | G*** |
| 1 | LOGO | Arul Sign:Arul Sign | G*** |
| 1 | L_Ferrite | 120R_Ferrite Bead_FC:BEADC1608X75N | L2 |
| 1 | MicroUSB FC | MicroUSB FC:AMPHENOL_10118192-0002LF | J10 |
| 1 | SD Card FC | SD Card FC:693071020811 | J2 |
| 1 | STM32F411RETx | STM32F411RET6:QFP50P1200X1200X160-64N | U8 |
| 1 | Screw_Terminal | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | Switch2 FC | Switch2 FC:SW_MPB01-1C33-S-D | S2 |
| 1 | U.FL-R-SMT_10_ | U.FL-R-SMT_10_:HRS_U.FL-R-SMT_10_ | J7 |
| 1 | W25Q128JVS | W25Q128JVSIQ:SOIC127P790X216-8N | U1 |
| 1 | ZOE-M8Q | ZOE-M8Q:ZOE-M8 | U5 |
The 80 most common of 84 parts.
Questions
How big is the FC InSpace Edits PCB?
It measures 67.4 × 64 mm and has 4 copper layers, 1.57 mm thick.
What parts does the FC InSpace Edits use?
84 parts, built around the ZOE-M8Q-0, BMP390L, W25Q128JVSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FC InSpace Edits KiCad files?
From the attenuatoriit/Avionics_RaSET repository on GitHub, at the commit this page was made from: the board is FC_InSpace_Edits.kicad_pcb and its schematic FC_InSpace_Edits.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FC InSpace Edits design in my own project?
Its repository states no licence, so its author keeps all rights: ask attenuatoriit before reusing the design.
Similar boards
- 2 layers22.6 × 35.1 mm
- 4 layers73 × 98 mm
ALBERT FLIGHTCOMPUTER
felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.
161 partsMIT - 4 layers43.5 × 53.1 mm
- 4 layers40.5 × 40.5 mm
CapstoneDronePCBV2
landodoughty/Flight-Controller
A Custom Flight Controller PCB I designed for one of my science fair projects.
53 partsMIT - 4 layers38 × 38 mm
STM32F405 Flight Controller Rev2
Ansariricky/Unochopper
designing and building a fully fledged fpv drone system from scratch
48 parts - 4 layers40 × 75 mm
- 4 layers42 × 44.4 mm
STM32 FlightController
JLjoestar23/STM32_FlightController
PCB, software, firmware, and other files related to a custom made STM32-based flight controller.
56 parts1