Skip to the content
2 layers36.8 × 58.4 mmCC SM mod 01, the printed circuit board in 3D

CC SM mod 01

attachix/ukit-pcb1

The PCBs needed to create the U:Kit sensor kit.

Size
36.8 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
26
Pads
72
Tracks, vias
106, 1
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
15 Apr 2018
Updated
4 Feb 2019

Overview

CC SM mod 01 is an open-source printed circuit board by attachix, from the attachix/ukit-pcb repository on GitHub. It is a 2-layer board of 36.8 × 58.4 mm with 26 parts on 26 nets, routed with 106 tracks and 1 via.

It is built around the BC847. Its parts include 12 resistors, 5 capacitors, 1 IC, 1 diode and 1 transistor.

Main components

1

README

README.md

About

This repository contains the files needed to view, modify and manufacture the Printed Circuit Boards(PCB) for the U:Kit sensor kit project.

UKit PCBs.

PCBs

U:Kit consists currently of 3 PCBS

Hardware Overview

Technical specification.

Required Software

For viewing and modifying the PCBs you will need KiCad version 4.0.5 or newer. In Ubuntu 16.04 you can install it by typing sudo apt install kicad.

Optional Software

If you want to be able to see better the differences between versions you will need

  • gerbv - for differences in Gerber files
  • ImageMagick - for differences in image files
  • diffpdf - for differences in PDF files
  • eeplot - for differences in Schema files.

Copyright

Copyright (c) 2016-2018, Slavey Karadzhov slav@attachix.com. All rights reserved.

Authors

License

All files in this repository are licensed under Creative Commons Non-Commercial-Share Alike 3.0 License . See the LICENSE file details. Basically it means that

You are free to

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • NonCommercial — You may not use the material for commercial purposes.

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Credit can be attributed through a link to the creator website: https://attachix.com

Parts

26
QtyValueFootprintReferences
2100KResistors_SMD:R_0805_HandSolderingR8, R11
210KResistors_SMD:R_0805_HandSolderingR1, R9
21KResistors_SMD:R_0805_HandSolderingR3, R10
1100uFCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC1
110MResistors_SMD:R_0805_HandSolderingR12
110RResistors_SMD:R_0805_HandSolderingR4
11n5Capacitors_SMD:C_0805_HandSolderingC5
1200KResistors_SMD:R_0805_HandSolderingR2
1220RResistors_SMD:R_0805_HandSolderingR7
122uFCapacitors_THT:CP_Radial_D4.0mm_P2.00mmC2
147nCapacitors_SMD:C_0805_HandSolderingC4
14n7Capacitors_SMD:C_0805_HandSolderingC3
1560RResistors_SMD:R_0805_HandSolderingR6
15KPotentiometers:Potentiometer_Trimmer_Piher_PT-6v_HorizontalRV1
18K2Resistors_SMD:R_0805_HandSolderingR5
1A5366Housings_DIP:DIP-16_W7.62mm_SocketU1
1BC847SOT-23Q1
1CONN_01X03CC_Footprint:WF3RP1
1Jumper_NOPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP1
1LEDCC_Footprint:LED_D3.0mmD1
1SmChCC_SM_mod_footprint:SmCh_LS-512-2OP1

The 24 most common of 26 parts.

More from attachix/ukit-pcb

2
  • 2 layers66 × 58.4 mmCC SSD 02, the printed circuit board in 3D

    CC SSD 02

    attachix/ukit-pcb

    The PCBs needed to create the U:Kit sensor kit.

    42 parts1
  • 2 layers21.6 × 32.4 mmCC ESP mod 02, the printed circuit board in 3D

    CC ESP mod 02

    attachix/ukit-pcb

    The PCBs needed to create the U:Kit sensor kit.

    14 parts1

Similar boards

  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 4 layers124.6 × 68.7 mmOssc board, the printed circuit board in 3D

    Ossc board

    marqs85/ossc_pcb

    ossc pcb design files

    265 parts163
  • 2 layers200 × 100 mmPolykit x monosynth, the printed circuit board in 3D

    Polykit x monosynth

    polykit/polykit-x-monosynth

    The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

    167 parts94
  • 2 layers156.6 × 125.2 mmAutoFeeder, the printed circuit board in 3D

    AutoFeeder

    ErichStyger/McuOpenPnP_Machine

    Repository for the McuOnEclipse OpenPnP machine

    58 parts69
  • 2 layers45.2 × 36.6 mmKaffeeInterface v1, the printed circuit board in 3D

    KaffeeInterface v1

    misteu/RPiCoffee

    Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities

    50 parts64BSD-3-Clause
  • 4 layers43.8 × 30.2 mmS VHS ZX Spectrum Rev. D, the printed circuit board in 3D

    S VHS ZX Spectrum Rev. D

    redhawk668/ZX-Spectrum-S-Video

    S-Video Modification PCB for the ZX Spectrum

    17 parts47GPL-3.0

Questions

How big is the CC SM mod 01 PCB?

It measures 36.8 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CC SM mod 01 use?

26 parts, built around the BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CC SM mod 01 KiCad files?

From the attachix/ukit-pcb repository on GitHub, at the commit this page was made from: the board is smoke-board/CC_SM_mod_01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CC SM mod 01 design in my own project?

Its repository states no licence, so its author keeps all rights: ask attachix before reusing the design.