2 layers36.8 × 58.4 mm
2 layers66 × 58.4 mm
CC SSD 02
attachix/ukit-pcb1The PCBs needed to create the U:Kit sensor kit.
- Size
- 66 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 43
- Pads
- 128
- Tracks, vias
- 382, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Apr 2018
- Updated
- 4 Feb 2019
Overview
CC SSD 02 is an open-source printed circuit board by attachix, from the attachix/ukit-pcb repository on GitHub. It is a 2-layer board of 66 × 58.4 mm with 42 parts on 43 nets, routed with 382 tracks and 33 vias.
It is built around the ATTINY1634-SU, MCP1802T-3302I/OT and DTC144TKA(TP), with the 220UF 10V 5*7 and 470UF 10V 6.3*7 among its other parts. Its parts include 14 resistors, 11 capacitors, 6 connectors, 3 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATTINY1634-SU
SOIC-20-300mil-40℃~+85℃ 1.8V~5.5V 10bit 12MHz 16KB 18 1KB 256Byte 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
MCP1802T-3302I/OT
SOT-23-5-40℃~+85℃@(Ta) 1 10V 25uA 3.3V 300mA 70dB@(10kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DTC144TKA(TP)
SOT-23SOT-23 Digital Transistors ROHSTECH PUBLICDigital Transistors220UF 10V 5*7
插件,5x7mm1000hrs@105℃ 10V 220uF 2mm 5mm 7mm 插件,5x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded470UF 10V 6.3*7
插件,6.3x7mm1000hrs@105℃ 10V 2.5mm 470uF 6.3mm 7mm 插件,6.3x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded
README
README.mdAbout
This repository contains the files needed to view, modify and manufacture the Printed Circuit Boards(PCB) for the U:Kit sensor kit project.
.
PCBs
U:Kit consists currently of 3 PCBS
- esp-board/ - ESP8266 PCB.
- base-board/ - the main board in the kit
- smoke-board/ - the board that operates with the smoke sensor
Hardware Overview
.
Required Software
For viewing and modifying the PCBs you will need KiCad version 4.0.5 or newer.
In Ubuntu 16.04 you can install it by typing sudo apt install kicad.
Optional Software
If you want to be able to see better the differences between versions you will need
- gerbv - for differences in Gerber files
- ImageMagick - for differences in image files
- diffpdf - for differences in PDF files
- eeplot - for differences in Schema files.
Copyright
Copyright (c) 2016-2018, Slavey Karadzhov slav@attachix.com. All rights reserved.
Authors
- Cviatko Delchev cviatko@attachix.com - Our hard-core hardware guru
- Slavey Karadzhov slav@attachix.com
- .. Contributors - See https://github.com/attachix/ukit-pcb/graphs/contributors
License
All files in this repository are licensed under Creative Commons Non-Commercial-Share Alike 3.0 License . See the LICENSE file details. Basically it means that
You are free to
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
NonCommercial — You may not use the material for commercial purposes.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Credit can be attributed through a link to the creator website: https://attachix.com
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 220 | CC_Footprint:R_0805_HandSoldering | R3, R4, R5, R6, R7, R13 |
| 5 | 100n | CC_Footprint:C_0805_HandSoldering | C2, C6, C7, C10, C11 |
| 4 | 1uF | CC_Footprint:C_0805_HandSoldering | C1, C3, C4, C5 |
| 2 | 0 | CC_Footprint:R_0805_HandSoldering | R9, R10 |
| 2 | 100k | CC_Footprint:R_0805_HandSoldering | R11, R12 |
| 2 | DTC144TKA | CC_Footprint:SOT-23_Handsoldering | Q1, Q2 |
| 2 | TS-06E | CC_Footprint:SW_PUSH_6mm | SW1, SW2 |
| 2 | WF2R | CC_Footprint:WF2R | P1, P6 |
| 1 | 1.8M | CC_Footprint:R_0805_HandSoldering | R1 |
| 1 | 10k | CC_Footprint:R_0805_HandSoldering | R8 |
| 1 | 1N5819 | CC_Footprint:D_SMA_Handsoldering | D1 |
| 1 | 200K | CC_Footprint:R_0805_HandSoldering | R2 |
| 1 | 220uF/10V | CC_Footprint:CP_Radial_D8.0mm_P2.50mm | C8 |
| 1 | 330 | CC_Footprint:R_0805_HandSoldering | R14 |
| 1 | 470uF/10V | CC_Footprint:CP_Radial_D8.0mm_P2.50mm | C9 |
| 1 | ATTINY1634-SU | CC_Footprint:SOIC-20W_7.5x12.8mm_Pitch1.27mm | IC1 |
| 1 | BH10R | CC_Footprint:BH10R | P3 |
| 1 | BH10S | CC_Footprint:IDC_Header_Straight_10pins | P2 |
| 1 | L-934LSRD | CC_Footprint:LED_D3.0mm | D2 |
| 1 | MCP1701AT-3302I/CB | CC_Footprint:SOT-23_Handsoldering | U1 |
| 1 | MCP1802T-3302I/OT | CC_Footprint:SOT-23-5_HandSoldering | U2 |
| 1 | PN1x3 | CC_Footprint:PN1x3 | P4 |
| 1 | WF3R | CC_Footprint:WF3R | P5 |
The 40 most common of 42 parts.
More from attachix/ukit-pcb
2- 2 layers21.6 × 32.4 mm
Similar boards
- 4 layers63.9 × 37.1 mm
Usbhid daq
shraken/usbhid_buddy
Hardware, firmware, and software for the USBHID DAQ 'Buddy' device
73 parts2 - 6 layers166 × 70.7 mm
- 2 layers270 × 140 mm
DigiSlatePlus
digislateplus/digislateplus.github.io
DigiSlate+ is based on the DigiSlate and is inspired by the DIY timecode generator from mitkunz. The aim for the DigiSlate+ is not only to be able to read and display timecode, but also to generate it itself.
130 parts - 2 layers96.5 × 73.2 mm
Bt radio manager e01
marianobilli/bluetooth-radio-manager
A self-contained, battery-powered box that puts four 2.4 GHz radios under one ESP32-S3, with a small OLED and encoder UI, in a 3D-printed case.
32 parts - 2 layers270 × 135.9 mm
- 2 layers80 × 132 mm
- 2 layers65 × 56.5 mm
RPi Hat
Blake-Robotics/PiUPS
Project to manage the power supply for the electronics of the robot. A microcontroller is used to monitor the state of the battery and external power inputs.
86 partsGPL-2.0 - 2 layers66.4 × 90.9 mm
Questions
How big is the CC SSD 02 PCB?
It measures 66 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CC SSD 02 use?
42 parts, built around the ATTINY1634-SU, MCP1802T-3302I/OT, DTC144TKA(TP) and 220UF 10V 5*7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CC SSD 02 KiCad files?
From the attachix/ukit-pcb repository on GitHub, at the commit this page was made from: the board is base-board/CC_SSD_02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CC SSD 02 design in my own project?
Its repository states no licence, so its author keeps all rights: ask attachix before reusing the design.