2 layers54.8 × 75.5 mm
Rp2040-basic m1
AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
71 parts
2 layers53.8 × 75.5 mm
Rp2040-basic m1
AtrivaTECH/picunoA repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
- Size
- 53.8 × 75.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 60
- Pads
- 211
- Tracks, vias
- 1,116, 121
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Feb 2024
- Updated
- 13 Jan 2026
Overview
Rp2040-basic m1 is an open-source printed circuit board by AtrivaTECH, from the AtrivaTECH/picuno repository on GitHub. It is a 2-layer board of 53.8 × 75.5 mm with 47 parts on 60 nets, routed with 1,116 tracks and 121 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 15 capacitors, 10 resistors, 9 connectors, 5 diodes and 3 ICs. It belongs with the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
RP2040/v2/kicad/v2.1/readme.mdKicad Files for 2.1 with level shifters on GPIO 0-5 and reset pin added.
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C7, C8, C9, C10, C11 |
| 3 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R33 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R16 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C12 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 27p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J6 |
| 2 | D_Schottky | Diode_SMD:D_SOD-128 | D1, D2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 2 | R_Small | Resistor_SMD:R_0805_2012Metric | R1, R8 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | AZ1117CH-3.3TRG1 SOT223-3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J9 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Crystal 12 Mhz | Crystal:Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm_HandSoldering | Y1 |
| 1 | D_TVS_Dual_AAC | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | TACT SW | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
The 44 most common of 47 parts.
Questions
How big is the Rp2040-basic m1 PCB?
It measures 53.8 × 75.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rp2040-basic m1 use?
47 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rp2040-basic m1 KiCad files?
From the AtrivaTECH/picuno repository on GitHub, at the commit this page was made from: the board is RP2040/v2/kicad/v2.0/rp2040-basic-m1.kicad_pcb and its schematic RP2040/old/rp2040-basic-m1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rp2040-basic m1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AtrivaTECH before reusing the design.
More from AtrivaTECH/picuno
4- 2 layers54.8 × 75.5 mm
Rp2040-basic m1
AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
69 parts - 2 layers54.8 × 75.5 mm
Rp2040-basic m1
AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
65 parts - 2 layers
Rp2040-basic m1 - Copy
AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
41 parts
Similar boards
- 2 layers42 × 67 mm
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
