
Dosimetro
gitdoalberto/dosimetro-ruido-nr15
Projeto desenvolvido como Eetapa de Capacitação Profissional - Embarcatech.

Repo containing all the neccessary files for the Electronic Dice Roller by Atricreations.
Dice roller is an open-source printed circuit board by atricreations, from the atricreations/Electronic-Dice-Roller repository on GitHub. It is a 2-layer board of 60.6 × 30.3 mm with 196 parts on 150 nets, routed with 1,403 tracks and 120 vias.
It is built around the RP2040, W25Q128JVSIQ and IP5306, with the SK6805-EC20, TS-1187A-B-A-B and TS24CA among its other parts. Its parts include 79 diodes, 67 capacitors, 21 resistors, 6 switches and 5 ICs. It belongs with the RP2040 boards of this library.
Repository containing all the necessary files for the Electronic Dice Roller by Atricreations.
There are 3 primary components to this repository:
This is the current iteration of a long running project seeking to implement electronic dice. This design features:
The code is fully open source and the design is to encourage tinkering. The current design isn't perfect but is highly functional. As updates are made they will be posted here.
If you like what is here consider buying one or some of the components off of our Etsy.
All complete dice come sold with the current version of software installed. If you would like to update the software you need to copy the files from the Code directory onto your device. Primarily this is done through Thonny.
When a source file is opened on Thonny and the correct interface is selected, you can upload the new source file onto the micorcontroller. All files need to be updated for them to work properly.
Don't hesitate to email us at Atricreations@gmail.com if you need help with your unit. We may take a while to respond but we can offer help if needed.
-V 0.1: 7/26/2024 - Initial Beta Release - Highly functional, lacks low power features, a few small bugs.
Electronic Dice Roller © 2024 by Atricareations is licensed under CC BY-NC 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc/4.0/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 77 | SK6805-EC20 | easyeda2kicad:LED-SMD_4P-L2.0-W2.0-BR | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +61 |
| 60 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C11, C12, C13, C14, C15, C16, C17, C18, C19, C23, C24, C25, C26, C27, C28 +44 |
| 6 | 0 | Resistor_SMD:R_0402_1005Metric | R9, R10, R12, R14, R15, R16 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R17, R20 |
| 4 | 22uf | Capacitor_SMD:C_0402_1005Metric | C2, C5, C9, C10 |
| 3 | TS-1187A-B-A-B | TS-1187A-B-A-B:SW_TS-1187A-B-A-B | S4, S5, S6 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R11, R13 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | 8p | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_2.0x2.0mm | J1, J2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0.5R | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1UH | easyeda2kicad:IND-SMD_L4.4-W4.2 | L1 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 20R | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | ADC1 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | ADC2 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | ADC3 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | BOOT | TS-1187A-B-A-B:SW_TS-1187A-B-A-B | S2 |
| 1 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP8 |
| 1 | GPIO12 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | GPIO13 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | GPIO14 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | GPIO16 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | GPIO17 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | GPIO18 | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | IP5306 | easyeda2kicad:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U1 |
| 1 | LM4040DBZ-2.0 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MCP1703Ax-330xxTT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U5 |
| 1 | RUN | TS-1187A-B-A-B:SW_TS-1187A-B-A-B | S3 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | SWD | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | TESTEN | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | TS24CA | easyeda2kicad:SW-SMD_TS24CA | SW1 |
| 1 | TYPE-C 16PIN 2MD(073) | easyeda2kicad:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | WTL2M45316LZ | easyeda2kicad:CRYSTAL-SMD_4P-L2.5-W2.0-BL | X1 |

gitdoalberto/dosimetro-ruido-nr15
Projeto desenvolvido como Eetapa de Capacitação Profissional - Embarcatech.



iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!


skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
It measures 60.6 × 30.3 mm and has 2 copper layers, 1.6 mm thick.
196 parts, built around the RP2040, W25Q128JVSIQ, IP5306 and SK6805-EC20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the atricreations/Electronic-Dice-Roller repository on GitHub, at the commit this page was made from: the board is PCB/dice_roller/dice_roller.kicad_pcb and its schematic PCB/dice_roller/dice_roller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask atricreations before reusing the design.