Skip to the content
2 layers28 × 20 mmMicro vault, the printed circuit board in 3D

Micro vault

atopile/hil29

Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

Size
28 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
28
Pads
73
Tracks, vias
48, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Jan 2025
Updated
22 May 2025

Overview

Micro vault is an open-source printed circuit board by atopile, from the atopile/hil repository on GitHub, published under the MIT licence. It is a 2-layer board of 28 × 20 mm with 26 parts on 28 nets, routed with 48 tracks and 0 vias.

Its parts include 15 resistors, 6 capacitors, 4 ICs and 1 transistor.

README

README.md

Hardware Test 🧪 for Happy Engineers, PMs and CTOs

Hardware-in-the-Loop, or HiL (sometimes HitL), is a way to continuously validate your hardware and firmware together. By connecting actual hardware to virtual test scenarios, HiL enables thorough testing of embedded systems, control units, and firmware under realistic conditions without the risks and costs of full physical testing.

HiL testing catches integration issues early, accelerates development cycles, and ensures robust system performance before deployment. Typically the domain of the most sophisticated automotive and aerospace companies, this HiL suite is now for all 🚀.

Usage

If you haven't already, get atopile and run through the quickstart and tutorial.

This suite is intended to be used as a dependency on your project. So, create a new project (ato create project) and add this suite as a dependency (ato install https://github.com/atopile/hil)

Parts

26
QtyValueFootprintReferences
815Ω ±1% 100mWatopile:R0603-ebcab9R2, R3, R4, R5, R12, R13, R14, R15
41µF ±10% 25V X5Ratopile:C0402-b3ef17C4, C5, C8, C9
310kΩ ±1% 62.5mWatopile:R0402-56259eR6, R7, R10
210µF ±10% 10V X5Ratopile:C0603-bd72f6C6, C7
1lib:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BLU7
1atopile:VSSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-beff67U5
1atopile:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL-294f77U6
1atopile:WSON-6_L2.0-W2.0-P0.65-TL-EP-c93430U8
1atopile:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR-186170Q1
112kΩ ±1% 62.5mWatopile:R0402-56259eR8
11MΩ ±1% 62.5mWatopile:R0402-56259eR1
136kΩ ±1% 62.5mWatopile:R0402-56259eR11
188.7kΩ ±0% 62.5mWatopile:R0402-56259eR9

More from atopile/hil

12
  • 6 layers415 × 335 mmSpace bms hil, the printed circuit board in 3D

    Space bms hil

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,742 parts29MIT
  • 6 layers195.1 × 202.2 mmCellsim-16ch, the printed circuit board in 3D

    Cellsim-16ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,464 parts29MIT
  • 4 layers28 × 20 mmCellsim-8ch, the printed circuit board in 3D

    Cellsim-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    608 parts29MIT
  • 6 layers122 × 100 mmCanjay, the printed circuit board in 3D

    Canjay

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    153 parts29MIT
  • 4 layers1.5 × 9.6 mmHil core, the printed circuit board in 3D

    Hil core

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    114 parts29MIT
  • 4 layers29.7 × 28.3 mmThermistor-8ch, the printed circuit board in 3D

    Thermistor-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    78 parts29MIT
  • 6 layersBuck boost, the printed circuit board in 3D

    Buck boost

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    69 parts29MIT
  • 4 layersCell, the printed circuit board in 3D

    Cell

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    64 parts29MIT
  • 2 layers48.1 × 19.2 mmBlack magic probe, the printed circuit board in 3D

    Black magic probe

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    61 parts29MIT
  • 2 layersBlack magic debugger, the printed circuit board in 3D

    Black magic debugger

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    52 parts29MIT
  • 2 layers32.3 × 64.4 mmMicro vault dev board, the printed circuit board in 3D

    Micro vault dev board

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    41 parts29MIT
  • 2 layersEthernet, the printed circuit board in 3D

    Ethernet

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    32 parts29MIT

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Micro vault PCB?

It measures 28 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Micro vault use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Micro vault KiCad files?

From the atopile/hil repository on GitHub, at the commit this page was made from: the board is elec/layout/micro-vault/micro-vault.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Micro vault design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).