

Project single
My design files. Abandon all hope ye who enter here.
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 16
- Pads
- 31
- Tracks, vias
- 45, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Project single is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 9 parts on 16 nets, routed with 45 tracks and 0 vias.
It is built around the 24LC1025-I/P. Its parts include 2 resistors, 2 connectors, 1 capacitor and 1 IC.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4K7 | footprints:R_0603 | R1, R2 |
| 1 | 0.1uF | footprints:C_0603 | C1 |
| 1 | 24LC1025 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | Beetje_Bottom | footprints:Pin_Header_Straight_1x06_Pitch2.54mm | J2 |
| 1 | Beetje_Top | footprints:Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 1 | Jumper | footprints:Jumper | JP1 |
| 1 | MadeInOregonRev25 | footprints:MadeInOregonRev25 | VAL |
The 8 most common of 9 parts.
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers284.7 × 94.2 mm

Nyan keys v09b
portlandhodl/nyan-keys-hardware
Hardware document for the nyan keys keyboard
144 parts96Apache-2.0 - 2 layers100.8 × 40 mm

KM217-WiFi
the78mole/km271-wifi
A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi
120 parts44 - 2 layers42.7 × 24.4 mm

BACEE
futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.
20 parts19MIT - 2 layers284 × 128.5 mm

Xva1-ui
MacMannes/XVA1-User-Interface
A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.
65 parts10GPL-3.0 - 2 layers130 × 80 mm

Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 4 layers49.3 × 34.1 mm

Dattalogger Board
DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
30 parts4 - 4 layers132.3 × 214.1 mm

Utracer11.unrouted
j-hoppe/uTracer11
flipchip probe and host GUI to visualize intenral operation of PDP-11 CPU
129 parts2BSD-3-Clause
Questions
How big is the Project single PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project single use?
9 parts, built around the 24LC1025-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project single KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Beetje/design_files_EEPROM/archive/project_single.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project single design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.