

Project - Copy
My design files. Abandon all hope ye who enter here.
- Size
- 1.8 × 10.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 25
- Pads
- 81
- Tracks, vias
- 55, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Project - Copy is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 1.8 × 10.7 mm with 39 parts on 25 nets, routed with 55 tracks and 0 vias.
It is built around the ATTINY84A-SSU. Its parts include 17 connectors, 9 resistors, 8 diodes, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | CONN_01X01 | footprints:Pad | P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11, P12, P13, P14, PG1, PP1 |
| 8 | 100 | footprints:R_1206 | R2, R3, R5, R6, R7, R8, R9, R10 |
| 8 | LED | footprints:LED-1206 | D2, D3, D5, D6, D7, D8, D9, D10 |
| 1 | 0 | footprints:R_1206 | R1 |
| 1 | 0.1 uF | footprints:C_1206 | C1 |
| 1 | ATTINY84A-SSU | footprints:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | AVR-ISP-6 | footprints:AVR-ISP-6 | CON1 |
| 1 | Battery | footprints:BATT_CR2032_SMD | BT1 |
| 1 | CONN_01X01 | Wire_Pads:SolderWirePad_single_1-5mmDrill | PG2 |
| 1 | SW_SPDT | footprints:SPST_SMD | SW1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers85 × 54 mm

- 2 layers151.5 × 25.4 mm

- 2 layers43.1 × 63.6 mm

Wenk sao
ShawnHymel/wenk-sao
Wenk SAO ======== Wenk Shitty Add-On to be used as a training tool for the "Microcontrollers the Hard Way" workshop. See Documentation/Worksheet and Documentation/Slides for more information.
27 parts5 - 2 layers68.4 × 68.6 mm

- 2 layers127 × 76.2 mm

JakeBadge
s7a73farm/s7a73farm_Party_Badge_DC26
s7a73farm party badge for Defcon 26. Code and Kicad files
44 parts2 - 2 layers26.1 × 33.7 mm

- 2 layers50.2 × 22.6 mm

Dog collar light
mattinglot/dog-collar-light
This is the LED dog collar light PCB and firmware that I built for my dog Joey and a few of his friends.
25 parts1 - 2 layers60.7 × 35.3 mm

LEDtester
AlanFord/LEDtester
A handy little AVR-based LED Tester with a user-controlled current source
25 parts
Questions
How big is the Project - Copy PCB?
It measures 1.8 × 10.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project - Copy use?
39 parts, built around the ATTINY84A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project - Copy KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/Cylon sew 2/design_files - MCU/project - Copy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project - Copy design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.