

LORA ATTINY84
PCB for the ATTiny Sensor Node, SMD Version
- Size
- 26.1 × 33.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 22
- Pads
- 61
- Tracks, vias
- 152, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Oct 2020
- Updated
- 9 Jul 2022
Overview
LORA ATTINY84 is an open-source printed circuit board by EvertVersteeg, from the EvertVersteeg/Imagine-IoT repository on GitHub. It is a 2-layer board of 26.1 × 33.7 mm with 11 parts on 22 nets, routed with 152 tracks and 14 vias.
It is built around the ATTINY84A-SSU and RFM95W-868S2. Its parts include 2 capacitors, 2 resistors, 1 diode and 1 connector. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
03 Lora-nodes Atmel ATtiny84-3216/1 TinyLoRa node BME280 v2/PCB_SMD/README.mdATTNode PCB (SMD Version)
PCB for the ATTiny Sensor Node, SMD Version
Parts List
| Reference | Part | Notes |
|---|---|---|
| ATTiny84 | ATTiny84A-SSU MCU (SOIC-14) | |
| RFM95 | HopeRF RFM95W Lora Module | |
| R1 | Resistor 100Ω SMD 1206 | Only if LED is mounted, Value fitting for LED |
| R2 | Resistor 47kΩ SMD 1206 | Pullup for NSS line, for more reliable programming |
| D1 | LED SMD 1206 | Optional, connected to pin A7 |
| C1,C2 | Capacitor 100nF SMD 1206 | Bypass Capacitors for ATTiny and RFM95 |
| BAT1 | CR2032 Battery Holder | See pictures for the type I used |
| ANT1 | 868 MHz Antenna | SMA Connector, u.fl Connector or Coil Antenna |
| J1 | 1x8 Pin 2.54mm pitch header | Optional, for the Case directly solder the Sensor to the Backside of the PCB |
| PRG1 | 2x3 Pin 2.54mm pitch header | Optional, has to be shortened from standard height to fit in the Case |
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | 47K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2 |
| 1 | ATtiny84A-SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | ATTiny84 |
| 1 | Antenna | SMA_Multi:SMA_Edge_UFL_Combo | ANT1 |
| 1 | Battery_Cell | battery_holder:BatteryHolder_Keystone_1060_1x2032_Long_Pad | BAT1 |
| 1 | J1 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | PRG | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | PRG1 |
| 1 | RFM95W-868S2 | RFM:RFM95 | RFM95 |
More from EvertVersteeg/Imagine-IoT
1- 2 layers46.4 × 35.6 mm

Similar boards
- 2 layers85 × 54 mm

- 2 layers151.5 × 25.4 mm

- 2 layers43.1 × 63.6 mm

Wenk sao
ShawnHymel/wenk-sao
Wenk SAO ======== Wenk Shitty Add-On to be used as a training tool for the "Microcontrollers the Hard Way" workshop. See Documentation/Worksheet and Documentation/Slides for more information.
27 parts5 - 2 layers68.4 × 68.6 mm

- 2 layers127 × 76.2 mm

JakeBadge
s7a73farm/s7a73farm_Party_Badge_DC26
s7a73farm party badge for Defcon 26. Code and Kicad files
44 parts2 - 2 layers50.2 × 22.6 mm

Dog collar light
mattinglot/dog-collar-light
This is the LED dog collar light PCB and firmware that I built for my dog Joey and a few of his friends.
25 parts1 - 2 layers60.7 × 35.3 mm

LEDtester
AlanFord/LEDtester
A handy little AVR-based LED Tester with a user-controlled current source
25 parts - 2 layers62 × 42 mm

Questions
How big is the LORA ATTINY84 PCB?
It measures 26.1 × 33.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LORA ATTINY84 use?
11 parts, built around the ATTINY84A-SSU and RFM95W-868S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LORA ATTINY84 KiCad files?
From the EvertVersteeg/Imagine-IoT repository on GitHub, at the commit this page was made from: the board is 03 Lora-nodes Atmel ATtiny84-3216/1 TinyLoRa node BME280 v2/PCB_SMD/LORA_ATTINY84.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LORA ATTINY84 design in my own project?
Its repository states no licence, so its author keeps all rights: ask EvertVersteeg before reusing the design.