2 layers89.6 × 93.3 mm
2 layers151.5 × 25.4 mm
ScrewdriverBadge
compukidmike/DC265DEFCON 26 Projects
- Size
- 151.5 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 31
- Pads
- 125
- Tracks, vias
- 439, 33
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Apr 2018
- Updated
- 13 Aug 2018
Overview
ScrewdriverBadge is an open-source printed circuit board by compukidmike, from the compukidmike/DC26 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 151.5 × 25.4 mm with 47 parts on 31 nets, routed with 439 tracks and 33 vias.
It is built around the ATTINY84A-SSU and BC817. Its parts include 15 resistors, 9 diodes, 1 capacitor, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY84A-SSU
SOIC-14-40℃~+85℃ 1.8V~5.5V 10bit 12 20MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdDEFCON 26 Projects
This is all the source code and production files for the badges we made for Defcon 26
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | R | ScrewdriverBadge:R_0603_Mid | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15 |
| 8 | LED | ScrewdriverBadge:LED-SMD-BottomEntry-OSRAM-LS-T776 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 1 | 0.1uF | ScrewdriverBadge:R_0603_Mid | C1 |
| 1 | ATTINY84A-SSU | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | AVR-ISP-6 | ScrewdriverBadge:ISP-AVR-6Pin-SMD | ISP |
| 1 | BC817 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | Battery | ScrewdriverBadge:Battery-2AA-BC12AAPC | BT1 |
| 1 | Buzzer | ScrewdriverBadge:Buzzer-12.6mm-Murata-PKM13EPYH4000 | BZ1 |
| 1 | FUNC | ScrewdriverBadge:TestPad-SMD-1mm-Tented | TP4 |
| 1 | LED | ScrewdriverBadge:LED-IR-RA-OSRAM-SFH-4045N | D1 |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverCoil | G*** |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverLastBand | G*** |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverSlider | G*** |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverRightGrip | G*** |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverLeftGrip | G*** |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverGoldBands2 | G*** |
| 1 | LOGO | ScrewdriverBadge:ScrewdriverCoilOutline | G*** |
| 1 | Resonator | ScrewdriverBadge:Resonator-AWSCR-3.7x3.1mm | Y1 |
| 1 | SLIDER1 | ScrewdriverBadge:TestPad-SMD-1mm-Tented | TP1 |
| 1 | SLIDER2 | ScrewdriverBadge:TestPad-SMD-1mm-Tented | TP2 |
| 1 | SLIDER3 | ScrewdriverBadge:TestPad-SMD-1mm-Tented | TP3 |
| 1 | SW_SPST | switches:JS202011JCQN | SW1 |
The 43 most common of 47 parts.
More from compukidmike/DC26
2- 2 layers34.9 × 62.6 mm
Similar boards
- 2 layers85 × 54 mm
- 2 layers43.1 × 63.6 mm
Wenk sao
ShawnHymel/wenk-sao
Wenk SAO ======== Wenk Shitty Add-On to be used as a training tool for the "Microcontrollers the Hard Way" workshop. See Documentation/Worksheet and Documentation/Slides for more information.
27 parts5 - 2 layers68.4 × 68.6 mm
- 2 layers127 × 76.2 mm
JakeBadge
s7a73farm/s7a73farm_Party_Badge_DC26
s7a73farm party badge for Defcon 26. Code and Kicad files
44 parts2 - 2 layers26.1 × 33.7 mm
- 2 layers50.2 × 22.6 mm
Dog collar light
mattinglot/dog-collar-light
This is the LED dog collar light PCB and firmware that I built for my dog Joey and a few of his friends.
25 parts1 - 2 layers60.7 × 35.3 mm
LEDtester
AlanFord/LEDtester
A handy little AVR-based LED Tester with a user-controlled current source
25 parts - 2 layers62 × 42 mm
Questions
How big is the ScrewdriverBadge PCB?
It measures 151.5 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ScrewdriverBadge use?
47 parts, built around the ATTINY84A-SSU and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ScrewdriverBadge KiCad files?
From the compukidmike/DC26 repository on GitHub, at the commit this page was made from: the board is GoonBoxBadge/KiCad Files/Screwdriver/ScrewdriverBadge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ScrewdriverBadge design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).