

Design files clock shield DS1302
My design files. Abandon all hope ye who enter here.
- Size
- 50.8 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 43
- Pads
- 125
- Tracks, vias
- 328, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files clock shield DS1302 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 50.8 × 53.3 mm with 36 parts on 43 nets, routed with 328 tracks and 2 vias.
It is built around the DS1302. Its parts include 20 resistors, 5 transistors, 2 ICs, 2 switches and 1 capacitor. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0 | Resistors_SMD:R_0402 | R2, R11, R12, R13, R19 |
| 5 | 100 | footprints:Resistor_Horz | R1, R7, R8, R9, R10 |
| 4 | 1K | footprints:Resistor_Horz | R3, R4, R5, R6 |
| 4 | 2N2222 | footprints:TO-92_NPN_EBC_wide | Q2, Q3, Q4, Q5 |
| 4 | NC | Resistors_SMD:R_0402 | R14, R15, R16, R20 |
| 2 | 4K7 | footprints:Resistor_Horz | R17, R18 |
| 2 | SW_Push | footprints:SW_PUSH_SMALL | SW2, SW3 |
| 1 | 0.1uF | footprints:C_Disc_D3.4mm_W2.1mm_P2.50mm | C2 |
| 1 | 32.768 | footprints:Crystal_C38-LF_d3.0mm_l8.0mm_Horizontal_1EP_style1 | Crystal1 |
| 1 | 3V | footprints:BATT_12mm_TH | BT2 |
| 1 | ARDUINO_SHIELD | footprints:ARDUINO_SHIELD | SHIELD1 |
| 1 | DS1302 | footprints:DIP-8_W7.62mm | U3 |
| 1 | KW4-56xxx | footprints:CA56-12CGKWA | U2 |
| 1 | MB225rev | myFootPrints:MB225rev | VAL |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | Photo | footprints:PHOTO_TRANS | Q1 |
| 1 | Speaker | footprints:PS1240_piezo | SPKR1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers96.3 × 98 mm

Aquarium
baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.
73 parts11 - 2 layers54.8 × 54.7 mm

- 2 layers76.2 × 38.1 mm

6502 Watch
ProbablyNotArtyom/6502-Watch
6502 powered wearable with an LCD screen, keyboard interface, and compact form factor, all running ehBasic to boot.
32 parts4 - 4 layers160 × 100 mm

- 2 layers

Robot seg
benja47012/Robot-de-seguridad
Robot de seguridad con diversas funciones, planteado con un protocolo I2C.
48 parts - 2 layers148.5 × 90 mm

ZxRebornClock
popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет
125 partsMIT
Questions
How big is the Design files clock shield DS1302 PCB?
It measures 50.8 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files clock shield DS1302 use?
36 parts, built around the DS1302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files clock shield DS1302 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/clock/design_files_clock_shield_DS1302/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files clock shield DS1302 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.