

Design files HBridgeX2
My design files. Abandon all hope ye who enter here.
- Size
- 34.3 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 21
- Pads
- 75
- Tracks, vias
- 198, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files HBridgeX2 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 34.3 × 25.4 mm with 21 parts on 21 nets, routed with 198 tracks and 9 vias.
It is built around the MCP3021A5-E. Its parts include 8 resistors, 5 connectors, 4 capacitors, 2 ICs and 1 diode.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | footprints:R_0805_HandSoldering | R1, R3, R4, R5, R6, R7, R8 |
| 2 | 0.1uF | footprints:C_0805_HandSoldering | C1, C3 |
| 2 | 10uF | footprints:C_1206 | C2, C4 |
| 2 | Conn_01x02 | footprints:terminal | J3, J5 |
| 1 | 1K | footprints:R_0805_HandSoldering | R2 |
| 1 | Beetje_Bottom | footprints:Beetje_Bottom | J2 |
| 1 | Beetje_Top | footprints:Beetje_Top | J4 |
| 1 | Conn_01x02 | footprints:terminal_mirror | J1 |
| 1 | LED | footprints:LED_0805_HandSoldering | D2 |
| 1 | MCP3021 | footprints:SOT-23-5 | U2 |
| 1 | MadeInOregonRev25 | footprints:MadeInOregonRev25 | VAL |
| 1 | TB66212FNG | footprints:SSOP-24_5.3x8.2mm_Pitch0.65mm | U1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 4 layers52 × 57 mm

- 2 layers100 × 100 mm

Xaar128-Driver
tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs
188 parts4Apache-2.0 - 2 layers75 × 44 mm

Iot aio
RWTH-EBC/OSIGBApp
Open-Source Internet of Things (IoT) Gateways for Building Automation Applications
46 parts3MIT - 2 layers

Rpi2HAT for ver3
jacekidziak/RPI_DRON_HAT
Project of PCB with servo driver, battery voltage measurement, IMU, GPS and barometr
77 parts1 - 2 layers65 × 56 mm

RPi Hat
omc8db/DigitalVoice
An open source codec2 based handheld digital radio for VHF/UHF amateur bands
76 parts1Apache-2.0 - 2 layers65 × 56 mm

Dingo hat
CCHS-Melbourne/dingo-cap
Donkey-Hat is a Raspberry Pi Hat to drive a Donkey Car (http://www.donkeycar.com/)
98 parts - 2 layers100 × 79 mm

- 2 layers65 × 55 mm

Questions
How big is the Design files HBridgeX2 PCB?
It measures 34.3 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files HBridgeX2 use?
21 parts, built around the MCP3021A5-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files HBridgeX2 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Beetje/archive/design_files_HBridgeX2/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files HBridgeX2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.