
Rpi2HAT
jacekidziak/RPI_DRON_HAT
Project of PCB with servo driver, battery voltage measurement, IMU, GPS and barometr

Project of PCB with servo driver, battery voltage measurement, IMU, GPS and barometr
Rpi2HAT for ver3 is an open-source printed circuit board by jacekidziak, from the jacekidziak/RPI_DRON_HAT repository on GitHub. It is a 2-layer board with 77 parts on 56 nets, routed with 608 tracks and 35 vias.
It is built around the MCP3021A5-E. Its parts include 28 resistors, 22 connectors, 12 capacitors, 2 ICs and 2 diodes. It belongs with the sensors and measurement boards of this library.
Project of PCB with servo driver, battery voltage measurement, IMU, GPS and barometr
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 220R | Resistors_SMD:R_1206 | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 |
| 16 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11, P12, P13, P14, P15, P16 |
| 12 | R | Resistors_SMD:R_1206 | R1, R2, R3, R4, R5, R6, R23, R24, R25, R26, R27, R28 |
| 6 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | BKP1, EXT1, EXT2, I/O1, I/O2, I/O3 |
| 6 | FJ | TSSOP28:FIXED_JUMPER | J1, J2, J3, J4, J5, J6 |
| 5 | C | Capacitors_SMD:C_1206 | C5, C7, C8, C10, C11 |
| 2 | 100n | Capacitors_SMD:C_1206 | C4, C12 |
| 2 | CP | Capacitors_SMD:C_1206 | C6, C9 |
| 2 | CP | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C1, C2 |
| 2 | D | Diodes_SMD:SOD-123 | D1, D2 |
| 1 | 10n | Capacitors_SMD:C_1206 | C3 |
| 1 | 7805 | TSSOP28:DPAK | U2 |
| 1 | BMP180-barometr | TSSOP28:BMP180 | U1 |
| 1 | MCP3021 | TSSOP28:SOT23A | ADC1 |
| 1 | MPU-9250_IMU | TSSOP28:3X3X1QFN | IMU2 |
| 1 | PCA9685_(IMU) | TSSOP28:TSSOIC28 | IMU1 |
| 1 | RPI2_GPIO_Head | TSSOP28:RPI2-HEAD | H1 |
| 1 | gus-u1616(GPS) | TSSOP28:GUS-custimezed | GPS1 |


tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

RWTH-EBC/OSIGBApp
Open-Source Internet of Things (IoT) Gateways for Building Automation Applications

omc8db/DigitalVoice
An open source codec2 based handheld digital radio for VHF/UHF amateur bands

CCHS-Melbourne/dingo-cap
Donkey-Hat is a Raspberry Pi Hat to drive a Donkey Car (http://www.donkeycar.com/)



77 parts, built around the MCP3021A5-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jacekidziak/RPI_DRON_HAT repository on GitHub, at the commit this page was made from: the board is Board/rpi2HAT_for_ver3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jacekidziak before reusing the design.