Skip to the content
2 layers25.4 × 48.3 mmDesign files, the printed circuit board in 3D

Design files

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
25.4 × 48.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
10
Pads
37
Tracks, vias
89, 0
Pours
12
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 48.3 mm with 11 parts on 10 nets, routed with 89 tracks and 0 vias.

It is built around the ATTINY85-15M. Its parts include 2 switches, 1 capacitor, 1 resistor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

11
QtyValueFootprintReferences
1signLOGO
10.1uFfootprints:C1C1
1330footprints:R3-LARGE_PADSR1
1ATTINY85footprints:DIP-8__300IC1
1AVR-ISP-6footprints:Pin_Header_Straight_2x03_Pitch2.54mmCON1
1BATTERYfootprints:BATT_CR2032_SMDBT1
1CONN_1078holeHOLE_2
1LEDfootprints:LED-3MMD4
1ONfootprints:SW_SPSTSW2
1SPEAKERfootprints:SPEAKERSP1
1TOUCHfootprints:SW_PUSH_TOUCHSW1

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers50 × 50 mmT85-with driver and poe, the printed circuit board in 3D

    T85-with driver and poe

    cnlohr/ethertiny

    A firmware-only half-duplex 10Base-T implementation for AVRs

    41 parts133
  • 2 layers23 × 45 mmCell monitor, the printed circuit board in 3D

    Cell monitor

    scttnlsn/cell-monitor

    Battery cell monitor and balancer

    13 parts39MIT
  • 2 layers41.1 × 110.7 mmJNTUB, the printed circuit board in 3D

    JNTUB

    joyfulnoisesynth/JNTUB

    JoyfulNoise Tiny Utility Board

    84 parts26
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers40 × 30 mmTest board, the printed circuit board in 3D

    Test board

    Guiimartinho/routeai

    LLM-Powered Electronic Design Automation Platform for PCB Design

    4 parts13
  • 2 layers78.3 × 78.5 mm50x70 tiny, the printed circuit board in 3D

    50x70 tiny

    rallekralle11/Tinyreflow

    Inspired by afterearthltd's reflow plate, but using fewer and simpler components.

    23 parts10
  • 2 layersMIDIMonkey, the printed circuit board in 3D

    MIDIMonkey

    aleh/MIDIMonkey

    Listens to MIDI messages on one pin and triggers drums on the others

    8 parts9MIT
  • 2 layers46.9 × 41.4 mmGR PW Noise, the printed circuit board in 3D

    GR PW Noise

    GadgetReboot/White_Pink_Noise

    White noise and pink noise PCB

    40 parts7

Questions

How big is the Design files PCB?

It measures 25.4 × 48.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files use?

11 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/TARDIS/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.