

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 18 × 41 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 32
- Pads
- 76
- Tracks, vias
- 193, 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 18 × 41 mm with 15 parts on 32 nets, routed with 193 tracks and 14 vias.
It is built around the ATMEGA328P-AU and MPL3115A2R1. Its parts include 4 capacitors, 3 resistors, 2 ICs, 2 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MPL3115A2R1
LGA-8(3x5)-40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHSNXP SemiconductorsPressure Sensors
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitors_SMD:C_0805 | C1, C3, C4 |
| 3 | 1K | Resistors_SMD:R_0805 | R1, R2, R3 |
| 1 | 10uF | Capacitors_SMD:C_1206 | C2 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | AVR-ISP-6 | myFootPrints:AVR-ISP-6 | CON1 |
| 1 | Battery_Cell | myFootPrints:BATT_CR2032_SMD | BT1 |
| 1 | Display | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1 |
| 1 | LED | LEDs:LED_0805 | D1 |
| 1 | MPL3115A | Housings_LGA:LGA-8_3x5mm_Pitch1.25mm | U2 |
| 1 | SW_Reed | footprints:REED_SWITCH | SW1 |
| 1 | SW_SPDT | Buttons_Switches_SMD:SW_SPDT_CK-JS102011SAQN | SW2 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 4 layers30 × 55 mm

- 4 layers50 × 60 mm

- 4 layers100.3 × 29 mm

RocketPCB
scottzach1/Project-Beans
VUW Engineering project to deliver a model rocket for a client.
76 parts3MIT - 4 layers32 × 25.5 mm

- 2 layers52 × 29 mm

- 2 layers152.4 × 63.7 mm

Cut down control board
dwkennedy/ballooning
Mutli-function balloon related project (variometer, balloon cut-down, let down reel, tracking)
52 parts2GPL-3.0 - 2 layers142 × 23 mm

Massue bento v4
benkuper/BenTo-Legacy
Legacy repository for the former BenTo-Club project
101 parts1GPL-3.0 - 2 layers48.3 × 43.2 mm

Questions
How big is the Design files PCB?
It measures 18 × 41 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
15 parts, built around the ATMEGA328P-AU and MPL3115A2R1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Altimeter - Copy/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.