

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 22.9 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 26
- Pads
- 83
- Tracks, vias
- 229, 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 22.9 × 71.1 mm with 32 parts on 26 nets, routed with 229 tracks and 8 vias.
It is built around the ATTINY84A-SSU. Its parts include 10 resistors, 8 diodes, 3 connectors, 2 switches and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100 | footprints:R_1206 | R0, R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | footprints:LED_1206 | D0, D1, D2, D3, D4, D5, D6, D7 |
| 2 | Conn_01x01 | footprints:Pin_Header_Straight_1x01_Pitch2.54mm | Probe1, Probe2 |
| 2 | Conn_01x03 | footprints:Pin_Header_Straight_1x03_Pitch1.00mm | J1, J2 |
| 1 | 0.1 uF | footprints:C_1206 | C1 |
| 1 | 10K | footprints:R_1206 | R9 |
| 1 | 2N3904 | footprints:SOT-23 | Q1 |
| 1 | ATTINY84A-SSU | footprints:SOIC-14_N | U1 |
| 1 | Battery | footprints:BATT_CR2032_SMD | BT1 |
| 1 | ISP | footprints:AVR-ISP-6 | CON1 |
| 1 | MB225rev | myFootPrints:MB225rev | VAL |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | SW_Push | footprints:SW_SMD_PUSH | SW2 |
| 1 | SW_SPDT | footprints:SPST_SMD | SW1 |
| 1 | Speaker | footprints:PS1240_piezo | LS1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers85 × 54 mm

- 2 layers151.5 × 25.4 mm

- 2 layers43.1 × 63.6 mm

Wenk sao
ShawnHymel/wenk-sao
Wenk SAO ======== Wenk Shitty Add-On to be used as a training tool for the "Microcontrollers the Hard Way" workshop. See Documentation/Worksheet and Documentation/Slides for more information.
27 parts5 - 2 layers68.4 × 68.6 mm

- 2 layers127 × 76.2 mm

JakeBadge
s7a73farm/s7a73farm_Party_Badge_DC26
s7a73farm party badge for Defcon 26. Code and Kicad files
44 parts2 - 2 layers26.1 × 33.7 mm

- 2 layers50.2 × 22.6 mm

Dog collar light
mattinglot/dog-collar-light
This is the LED dog collar light PCB and firmware that I built for my dog Joey and a few of his friends.
25 parts1 - 2 layers60.7 × 35.3 mm

LEDtester
AlanFord/LEDtester
A handy little AVR-based LED Tester with a user-controlled current source
25 parts
Questions
How big is the Design files PCB?
It measures 22.9 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
32 parts, built around the ATTINY84A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/SoilMoisture/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.