

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 26.7 × 51.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 11
- Pads
- 90
- Tracks, vias
- 200, 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 26.7 × 51.4 mm with 45 parts on 11 nets, routed with 200 tracks and 7 vias.
It is built around the ATTINY85-15M. Its parts include 22 connectors, 1 capacitor, 1 resistor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | CONN_01X01 | footprints:Pad_Ground | P4, PA2, PB3, PB4, PG1, PG2, PG3, PL2, PS2, PT2 |
| 9 | CONN_01X01 | footprints:Pad_sew | P2, P3, P5, P6, P7, PA1, PL1, PS1, PT1 |
| 3 | CONN_01X01 | footprints:Pad_Pos | PB1, PB2, PP1 |
| 1 | 0.1 uF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 330 | footprints:R_1206 | R1 |
| 1 | ATTINY85 | footprints:SOIJ-8_5.3x5.3mm_Pitch1.27mm | IC1 |
| 1 | Battery | footprints:BATT_CR2032_SMD | BT1 |
| 1 | CONN_01X01 | Pad_Pos | P8 |
| 1 | ISP | footprints:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | JMP | myFootPrints:SW_SMD_TOUCH | J1 |
| 1 | LED | footprints:LED_1206 | D1 |
| 1 | LIGHT | footprints:LED_1206 | Q1 |
| 1 | LOGO | footprints:CR2032 | G*** |
| 1 | MB225rev | footprints:MB225rev | VAL |
| 1 | MadeInOregonRev25 | footprints:MadeInOregonRev25 | VAL |
| 1 | SPEAKER | Piezo_test | SP1 |
| 1 | SW_SPDT | footprints:SPST_SMD | SW1 |
The 36 most common of 45 parts.
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers50 × 50 mm

T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm

- 2 layers41.1 × 110.7 mm

- 2 layers

- 2 layers40 × 30 mm

Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm

50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers

MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT - 2 layers46.9 × 41.4 mm

Questions
How big is the Design files PCB?
It measures 26.7 × 51.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
45 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/SnapNSewSMD/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.