Skip to the content
2 layers12.7 × 12.7 mmDesign files, the printed circuit board in 3D

Design files

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
12.7 × 12.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
4
Pads
11
Tracks, vias
20, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 12.7 × 12.7 mm with 4 parts on 4 nets, routed with 20 tracks and 0 vias.

It is built around the QRE1113. Its parts include 2 resistors, 1 IC and 1 connector.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

4
QtyValueFootprintReferences
1100Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
110KResistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1CONN_01X03Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ1
1QRE1113QRE1113U1

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 4 layers122.2 × 115.1 mmScan controller kicad, the printed circuit board in 3D

    Scan controller kicad

    fwachsmuth/Filmkorn-Raw-Scanner

    The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG

    170 parts13MIT
  • 2 layers136.6 × 116.9 mmDragonBot, the printed circuit board in 3D

    DragonBot

    OPRobots/DragonBot

    Robot siguelineas con succión centrifuga y STM32F1

    86 parts8GPL-2.0
  • 2 layers60 × 100 mmRobot boosterpack, the printed circuit board in 3D

    Robot boosterpack

    Hylian/BoosterBot

    Turn your TI LaunchPad into a robot!

    62 parts7
  • 2 layers96 × 78.3 mmYokozunita potencia, the printed circuit board in 3D

    Yokozunita potencia

    OPRobots/Yokozunita

    Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.

    45 parts2GPL-3.0
  • 2 layers35.5 × 58 mmEsguicho 2.0, the printed circuit board in 3D

    Esguicho 2.0

    project-neon/Esguicho

    Neste repositório temos os principais arquivos que usamos para os 3 capítulos, Eletrônica, Mecânica e Software. Segue abaixo uma lista do que temos em cada uma das pastas:

    45 parts2
  • 4 layers80 × 87.6 mmAratMicro, the printed circuit board in 3D

    AratMicro

    vorlaxen-labs/AratMicro

    High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).

    110 parts1MIT
  • 2 layers130 × 119 mmVelocista, the printed circuit board in 3D

    Velocista

    zarattee/velocista

    robot seguidor de linea

    63 parts1

Questions

How big is the Design files PCB?

It measures 12.7 × 12.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files use?

4 parts, built around the QRE1113. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/NerfChrono/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.