

Design files V07 SMD
My design files. Abandon all hope ye who enter here.
- Size
- 80 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 44
- Pads
- 190
- Tracks, vias
- 715, 36
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files V07 SMD is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 80 × 38 mm with 58 parts on 44 nets, routed with 715 tracks and 36 vias.
It is built around the ATMEGA328-PU, TC78H611FNG,EL and IRLB8721PBF. Its parts include 18 resistors, 13 connectors, 10 capacitors, 6 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TC78H611FNG,EL
TSSOP-16-30℃~+85℃ 2 2.7V~5.5V 800mA 800mΩ Bipolar Driver Overcurrent Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes TSSOP-16 Stepper Motor Driver ROHSToshibaStepper Motor DriverIRLB8721PBF
TO-220AB-55℃~+175℃ 1 N-channel 1.077nF 110pF 13nC@4.5V 16mΩ@4.5V 2.35V 30V 360pF 62A 65W N-Channel ±20V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | footprints:R_0805_HandSoldering | R1, R3, R6, R9, R10, R17, R19, R20 |
| 6 | 0.1uF | footprints:C_0805_HandSoldering | C3, C5, C7, C8, C9, C10 |
| 4 | 1K | footprints:R_0805_HandSoldering | R2, R7, R11, R18 |
| 3 | 10K 1% | footprints:R_0805_HandSoldering | R8, R12, R13 |
| 3 | HALL SENSOR | footprints:SC-59_Handsoldering | U3, U4, U6 |
| 2 | 1uF | footprints:C_0805_HandSoldering | C1, C4 |
| 2 | LOGO | footprints:RS_left | G***, G*** |
| 2 | NPTH | footprints:SolderWirePad_single_2-5mmDrill | J14, J14 |
| 1 | 0.1uFs | footprints:C_0805_HandSoldering | C6 |
| 1 | 100 | footprints:R_0805_HandSoldering | R21 |
| 1 | 10Ks | footprints:R_0805_HandSoldering | R4 |
| 1 | 10uF | footprints:C_0805_HandSoldering | C2 |
| 1 | 16Mhz | footprints:Resonator_SMD_CTSC_1.3mmx3.2mm | Y1 |
| 1 | 1Ks | footprints:R_0805_HandSoldering | R5 |
| 1 | 2S | footprints:JMPR | JP1 |
| 1 | A0 | footprints:Pin_Header_Straight_1x02_Pitch2.00mm | J11 |
| 1 | ATMEGA328P | footprints:TQFP-32_7x7mm_Pitch0.8mm | U5 |
| 1 | BATT_IN | footprints:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | DISPLAY | footprints:Molex_PicoBlade_53048-0410_04x1.25mm_Angled | J5 |
| 1 | FTDI | footprints:Pin_Header_Angled_1x06_Pitch2.54mm | J7 |
| 1 | INPUTS | footprints:Molex_PicoBlade_53048-1010_10x1.25mm_Angled | J6 |
| 1 | IRLB8721 | footprints:TO-252-2_hand_soldering | Q1 |
| 1 | ISP | Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | JAM | footprints:Molex_PicoBlade_53048-0210_02x1.25mm_Angled | J4 |
| 1 | KICKBACK | footprints:D_SMB_Handsoldering | D1 |
| 1 | LED | footprints:LED_D3.0mm_Horizontal_O1.27mm_Z10.0mm | D13 |
| 1 | MCP1702 | footprints:SOT-89-3_Handsoldering | U1 |
| 1 | MTRS | footprints:TerminalBlock_bornier-2_P5.08mm | J9 |
| 1 | NiMH | footprints:JMPR | JP2 |
| 1 | PHOTO | footprints:Molex_PicoBlade_53048-0310_03x1.25mm_Angled | J8 |
| 1 | PTC | footprints:Fuse_SMD2920 | F1 |
| 1 | PTC | footprints:Fuse_SMD1210 | F2 |
| 1 | PUSHER | footprints:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | SPEAKER | footprints:SPEAKER | LS1 |
| 1 | TC78H611FNG | footprints:TSSOP-16-1EP_4.4x5mm_Pitch0.65mm | U2 |
| 1 | TEST | Pin_Header_Straight_1x03_Pitch2.00mm | J1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers68.5 × 102.5 mm

Saved lasergame vs
ghostleyjim/simple-lasertag
simple lasertag with light detection (LDR). No transmission outside PCB
23 parts - 2 layers100.3 × 118.6 mm

Lights Shild
martinfantini/ModelTrains
This repo contains all the information regarding to the model trains project
41 parts - 2 layers50.8 × 28.6 mm

Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0 - 2 layers99.1 × 99.1 mm

- 2 layers36 × 31 mm

ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm

- 4 layers104.2 × 77.7 mm

- 4 layers69.9 × 44.5 mm

DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT
Questions
How big is the Design files V07 SMD PCB?
It measures 80 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files V07 SMD use?
58 parts, built around the ATMEGA328-PU, TC78H611FNG,EL and IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files V07 SMD KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/Ardu RapidStrike/design_files V07 SMD/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files V07 SMD design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.