
LDR LED
ghostleyjim/simple-lasertag
simple lasertag with light detection (LDR). No transmission outside PCB

simple lasertag with light detection (LDR). No transmission outside PCB
Saved lasergame vs is an open-source printed circuit board by ghostleyjim, from the ghostleyjim/simple-lasertag repository on GitHub. It is a 2-layer board of 68.5 × 102.5 mm with 23 parts on 31 nets, routed with 111 tracks and 0 vias.
It is built around the ATMEGA328-PU and IRLB8721PBF. Its parts include 3 capacitors, 2 resistors, 1 IC, 1 transistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
lasergame
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Screw_Terminal_01x02 | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_MKDS1.5-2pol | LDR back, LDR front, LEDS_front, Light, Reload, Trigger |
| 3 | SW_SPST | Buttons_Switches_THT:SW_PUSH_6mm_h9.5mm | RESET, Scroll, Select |
| 2 | C | Capacitors_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2 |
| 1 | ATmega328-PU | Housings_DIP:DIP-28_W7.62mm | U1 |
| 1 | Buzzer | Buzzers_Beepers:BUZZER | BZ1 |
| 1 | C | Capacitors_SMD:C_1206_HandSoldering | C3 |
| 1 | Conn_01x04_Female | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | Display |
| 1 | Crystal | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | IRLB8721PBF | TO_SOT_Packages_THT:TO-220-3_Vertical | Q1 |
| 1 | LED | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_MKDS1.5-2pol | LEDs Back |
| 1 | Programming port | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J7 |
| 1 | R | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | R | Resistors_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R3 |
| 1 | SW_Reed | reed switch:Reed Switch THT | SW2 |
| 1 | USB_B | Connectors:USB_B | 5V in |

ghostleyjim/simple-lasertag
simple lasertag with light detection (LDR). No transmission outside PCB


martinfantini/ModelTrains
This repo contains all the information regarding to the model trains project

KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.


stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.



chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
It measures 68.5 × 102.5 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the ATMEGA328-PU and IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ghostleyjim/simple-lasertag repository on GitHub, at the commit this page was made from: the board is lasergame vs/_saved_lasergame vs.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ghostleyjim before reusing the design.