

Base
My design files. Abandon all hope ye who enter here.
- Size
- 67.3 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 17
- Pads
- 59
- Tracks, vias
- 144, 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 67.3 × 25.4 mm with 18 parts on 17 nets, routed with 144 tracks and 2 vias.
It is built around the ATTINY85-15M. Its parts include 4 resistors, 4 diodes, 2 capacitors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2 |
| 2 | ZD3V6 | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1, D2 |
| 1 | 0.1 uF | myFootPrints:C1 | C1 |
| 1 | 10uF | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C2 |
| 1 | 1K5 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3 |
| 1 | 1N4001 | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D4 |
| 1 | 330 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R4 |
| 1 | ATTINY85 | Housings_DIP:DIP-8__300 | IC1 |
| 1 | Battery | myFootPrints:BATT_CR2032 | BT1 |
| 1 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10 | P1 |
| 1 | LIGHT | PHOTO_TRANS | Q1 |
| 1 | PWR | LEDs:LED-5MM | D3 |
| 1 | SPST | myFootPrints:SW_SPST | SW1 |
| 1 | SS | myFootPrints:SolderingSundayLogo | G*** |
| 1 | SW_PUSH | myFootPrints:SW_PUSH_TOUCH | TOUCH1 |
| 1 | USB | Connect:USB_B | J1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers50 × 50 mm

T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm

- 2 layers41.1 × 110.7 mm

- 2 layers

- 2 layers40 × 30 mm

Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm

50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers

MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT - 2 layers46.9 × 41.4 mm

Questions
How big is the Base PCB?
It measures 67.3 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
18 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/brain_board/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.