

Sb com
Portfolio for Handshake AI work
- Size
- 43 × 43 mm
- Copper layers
- 4
- Thickness
- 1.54 mm
- Parts
- 36
- Nets
- 89
- Pads
- 188
- Tracks, vias
- 350, 82
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 May 2026
- Updated
- 14 May 2026
Overview
Sb com is an open-source printed circuit board by aryder161, from the aryder161/portfolio repository on GitHub. It is a 4-layer board of 43 × 43 mm with 36 parts on 89 nets, routed with 350 tracks and 82 vias.
It is built around the NRF52833-QDAA-R, RFM95W-915S2 and TLV73333PQDBVRQ1, with the CGA3E3X7S2A104K080AB, CGA3E1X7R1C105K080AC and SG73P1JTTD5101F among its other parts. Its parts include 15 capacitors, 8 connectors, 4 resistors, 3 ICs and 3 diodes. It belongs with the nRF52 and nRF5x boards of this library.
Main components
12NRF52833-QDAA-R
QFN-40-EP(5x5)QFN-40-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSNordic SemiconMicrocontrollers (MCU/MPU/SOC)RFM95W-915S2
LCC-16_16X16mmLCC-16_16X16mm New Arrivals ROHSHopeRF Micro-electronicsUncategorisedTLV73333PQDBVRQ1
SOT-23-5-40℃~+150℃@(Tj) 1 120uVrms 125mV@(300mA) 3.3V 300mA 34uA 5.5V 50dB@(1kHz) Fixed Over Current Protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCGA3E3X7S2A104K080AB
0603100V 100nF X7S ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTDKMultilayer Ceramic Capacitors MLCC - SMD/SMTCGA3E1X7R1C105K080AC
060316V 1uF X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTDKMultilayer Ceramic Capacitors MLCC - SMD/SMTSG73P1JTTD5101F
0603-55℃~+155℃ 333mW 5.1kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSKOA Speer ElectronicsChip Resistor - Surface MountSML-D12P8WT86C
06032.2V 20mA 560nm 6.3mcd Discrete Diode Green White Lens 0603 LED Indication - Discrete ROHSROHM SemiconductorLED Indication - DiscreteABM8AIG-32.000MHZ-8-2Z-T
SMD3225-4P-40℃~+125℃ 18pF 32MHz 40Ω ±20ppm ±50ppm SMD3225-4P Crystals ROHSAbraconCrystalsABS07AIG-32.768KHZ-9-T
SMD3215-2P-40℃~+125℃ 32.768kHz 80kΩ 9pF ±20ppm SMD3215-2P Crystals ROHSAbraconCrystalsBAT54W-HG3-18
SOD-123-55℃~+125℃ 1 Independent 200mA 2uA@25V 30V 600mA 800mV@100mA SOD-123 Schottky Diodes ROHSVishay IntertechnologySchottky DiodesDX07S016JA1R1500
SMD-40℃~+85℃ 1 250mA、1.25A 48V Black Female Type-C USB 2.0 SMD USB Connectors ROHSJAE ElectronicsUSB ConnectorsPTS810SJK250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 16V 2.5mm 2.6N 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile Switches
README
README.mdportfolio
Portfolio for Handshake AI work Contains KiCad and Embedded Software work on 3 different PCBs. Those PCBs contain the Command and Data Handling (CDH) board, the Communications (Comms), and Payload (LoRa Communications) boards.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CGA3E3X7S2A104K080AB | sb-com:CAPC1608X90N | C5, C7, C11, C14 |
| 4 | Conn_01x04 | sb-com:CES-104-XX-Y-S | J4, J5, J6, J7 |
| 4 | GCM1885C2A120GA16D | sb-com:GCM188 | C1, C2, C15, C16 |
| 3 | CGA3E1X7R1C105K080AC | sb-com:CAPC1608X90N | C3, C12, C13 |
| 3 | GRT188C71C475KE13D | sb-com:GRT188 | C6, C18, C19 |
| 2 | Conn_01x16 | sb-com:CES-116-XX-Y-S | J8, J9 |
| 2 | SG73P1JTTD5101F | sb-com:RESC1608X55N | R5, R6 |
| 2 | SG73S1JTTD1001F | sb-com:RESC1608X55N | R1, R2 |
| 2 | SML-D12P8WT86C | sb-com:LEDM1620X150N | LED1, LED2 |
| 1 | ABM8AIG-32.000MHZ-8-2Z-T | sb-com:ABM8AIG25000MHZ122ZT3 | Y1 |
| 1 | ABS07AIG-32.768KHZ-9-T | sb-com:ABS07AIG | Y2 |
| 1 | BAT54W-HG3-18 | sb-com:SOD3716X135N | D1 |
| 1 | C0603C101J1GACAUTO | sb-com:C0603 | C10 |
| 1 | Conn_01x04 | sb-com:SB_Stack_Mounting_Holes | J3 |
| 1 | DX07S016JA1R1500 | sb-com:JAE_DX07S016JA1R1500 | J2 |
| 1 | PTS810SJK250SMTR_LFS | sb-com:PTS810SJK250SMTRLFS | S1 |
| 1 | RFM95W-915S2 | RF_Module:HOPERF_RFM9XW_SMD | U1 |
| 1 | TLV73333PQDBVRQ1 | sb-com:SOT95P280X145-5N | IC3 |
| 1 | nRF52833-QDAA-R | sb-com:QFN40P500X500X90-41N | IC1 |
More from aryder161/portfolio
2- 4 layers43 × 43 mm

- 4 layers43 × 43 mm

Similar boards
- 2 layers135.8 × 119.9 mm

BsidesPR
So11Deo6loria/bsidesPRSun
Please note that if the badge is running consistently, the battery life will be limited.
81 parts5 - 2 layers76.7 × 114.3 mm

BHV Badge 2026
nathantsmith/BHV_Badge_2026
KiCad PCB design files for the BHV badge: a wearable, off-grid messenger with a pulse sensor and a heartbeat made of light.
36 parts1MIT - 4 layers49.5 × 56.8 mm

BLE CAN module
shivamtiwari020505/Automotive-BLE-CAN-Module
KiCad hardware design for an automotive BLE-to-CAN module
110 parts - 8 layers90 × 60 mm

- 4 layers73.3 × 74.4 mm

Piezo sensing
Markvsid/Piezo_sensing
Exploratory project using piezoelectric contact sensor to attempt to extract footstep count, breathing, and heartbeat. 4 layer stm32H7 PCB with analog charge amplifier front end.
105 parts - 2 layers46.3 × 75 mm

Finalpcb landreesen
LukeAndreesen/studyPCB
A Study Timer PCB Project - hold yourself accountable by setting the timer, attaching your phone to the detector, and sitting in front of the module.
76 parts1 - 4 layers100 × 100 mm

- 2 layers135.5 × 77 mm

Pcb final
asprgchong/HCI-Engineering-and-PCB
Project Files and Demo videos from my HCI PCB and HCI Eng classes with Professor Pedro Lopes
63 parts
Questions
How big is the Sb com PCB?
It measures 43 × 43 mm and has 4 copper layers, 1.54 mm thick.
What parts does the Sb com use?
36 parts, built around the NRF52833-QDAA-R, RFM95W-915S2, TLV73333PQDBVRQ1 and CGA3E3X7S2A104K080AB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sb com KiCad files?
From the aryder161/portfolio repository on GitHub, at the commit this page was made from: the board is comboard/sb-com.kicad_pcb and its schematic cdhboard/sb-cdh.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sb com design in my own project?
Its repository states no licence, so its author keeps all rights: ask aryder161 before reusing the design.