

SDR IF
- Size
- 50 × 56.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 46
- Pads
- 208
- Tracks, vias
- 459, 39
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Sep 2019
- Updated
- 20 May 2024
Overview
SDR IF is an open-source printed circuit board by arsenal007, from the arsenal007/sdr_if_pcb repository on GitHub. It is a 2-layer board of 50 × 56.3 mm with 69 parts on 46 nets, routed with 459 tracks and 39 vias.
It is built around the MC33079D, LL4148 and MMBT2222A. Its parts include 35 resistors, 20 capacitors, 4 connectors, 4 inductors and 3 ICs. It belongs with the radio and wireless boards of this library.
Main components
3MC33079D
SOIC-14-40℃~+85℃ 100dB 150uV 16MHz 25nA 29mA 2uV/℃ 300nA 4 4.5nV/√Hz@1kHz 5V~18V 7V/us 8.4mA ESD protection SOIC-14 Operational Amplifier ROHSonsemiOperational AmplifierLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R13, R14, R15, R18, R21, R22, R23 |
| 6 | 100nF | SDR_footprints:C_1206_0603 | C3, C17, C57, C64, C66, C83 |
| 6 | 4,7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39, R41, R42, R43, R45, R46 |
| 5 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C16, C18, C19, C58, C65 |
| 4 | 1 | SDR_footprints:R_1206_0603 | R40, R44, R47, R48 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R27, R51, R52 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R12, R19, R20 |
| 2 | 100 | SDR_footprints:R_1206_0603 | R11, R17 |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W_Pad2.25x2.55mm_HandSolder | C1, C2 |
| 2 | 100uH | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L4, L20 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C60, C61 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R49, R50 |
| 2 | 300 | SDR_footprints:R_1206_0603 | R10, R16 |
| 2 | 390pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C55, C56 |
| 2 | 4,7uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C59, C62 |
| 2 | 4.7mH | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L21, L22 |
| 2 | 750 | SDR_footprints:R_1206_0603 | R24, R25 |
| 2 | AudioJack3_Ground_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J2, J10 |
| 2 | MC33079 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5, U10 |
| 1 | 2..4.7k | SDR_footprints:R_1206_0603 | R53 |
| 1 | 22..47nF | SDR_footprints:C_1206_0603 | C63 |
| 1 | 78M09 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | FRT5_separated | Relay_THT:Relay_DPDT_FRT5 | K3 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D1 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q9 |
| 1 | RX | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | TX | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers137.3 × 46.2 mm

- 4 layers149.6 × 63.5 mm

Esp p148-3way crossover retuned quad smd
nict41/crossover
An EasyEDA-importable schematic for the 3-way state variable electronic crossover from Elliott Sound Products Project 148 ( ), redrawn from Figure 2.
90 parts - 4 layers138.6 × 100 mm

MegaDAQ
Orthogonal-Systems/MegaDAQ
Data acquisition shield for VMEMega system compatible with arduino mega boards. 16 12b ADCs and 12 12b DACs.
168 partsGPL-3.0 - 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 4 layers100 × 50 mm

Psu ext
PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.
137 parts9CERN-OHL-S-2.0 - 2 layers100 × 60 mm

- 2 layers145 × 118 mm

- 2 layers228.6 × 100 mm

Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0
Questions
How big is the SDR IF PCB?
It measures 50 × 56.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SDR IF use?
69 parts, built around the MC33079D, LL4148 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SDR IF KiCad files?
From the arsenal007/sdr_if_pcb repository on GitHub, at the commit this page was made from: the board is SDR_IF.kicad_pcb and its schematic IF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SDR IF design in my own project?
Its repository states no licence, so its author keeps all rights: ask arsenal007 before reusing the design.