

UltrasoundDriver
- Size
- 137.3 × 46.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 28
- Pads
- 142
- Tracks, vias
- 244, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Oct 2022
- Updated
- 9 Oct 2022
Overview
UltrasoundDriver is an open-source printed circuit board by DillBaggins, from the DillBaggins/ultrasonicDriverPCB repository on GitHub. It is a 2-layer board of 137.3 × 46.2 mm with 52 parts on 28 nets, routed with 244 tracks and 14 vias.
It is built around the MC33079D, L7815 and L7915, with the 1N4148W, 3224W-1-103E and B5819W SL-TD among its other parts. Its parts include 18 resistors, 16 capacitors, 6 diodes, 4 ICs and 2 transistors.
Main components
8MC33079D
SOIC-14-40℃~+85℃ 100dB 150uV 16MHz 25nA 29mA 2uV/℃ 300nA 4 4.5nV/√Hz@1kHz 5V~18V 7V/us 8.4mA ESD protection SOIC-14 Operational Amplifier ROHSonsemiOperational AmplifierL7815
TO-220ST0℃~+125℃@(Tj) 1 1.2A 15V 2V@(1A) 30V 500uA 70dB@(120Hz) 90uV Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7915
TO-220ST0℃~+125℃@(Tj) 1 1.5A 15V 250uV 2V@(1A) 30V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes3224W-1-103E
SMD-3P,4.8x3.5mm10kΩ 12 250mW ±10% ±100ppm/℃ SMD-3P,4.8x3.5mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable ResistorsB5819W SL-TD
SOD-123UncategorisedTDSEMICS8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C8, C9, C13, C16 |
| 6 | 10n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C7, C10, C14, C15 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R10, R16, R17, R18 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R8, R9, R15 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R7, R12 |
| 2 | 3224W-1-103E | SamacSys_Parts:3224W1205E | VR1, VR2 |
| 2 | 400ST16M | SamacSys_Parts:400ST16M | LS1, LS2 |
| 2 | B5819W.SL | SamacSys_Parts:B5819WSL | D5, D6 |
| 2 | Conn_01x05_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1, J2 |
| 2 | MC33079 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U4 |
| 1 | 0.1u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C11 |
| 1 | 0.33u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C12 |
| 1 | 2.2u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C6 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 390k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 6.8k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | L7815 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | U2 |
| 1 | L7915 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | U3 |
| 1 | S8550 | SamacSys_Parts:SOT95P240X115-3N | Q2 |
| 1 | SS8050-G | SamacSys_Parts:SOT95P240X115-3N | Q1 |
Similar boards
- 4 layers125 × 70 mm

- 4 layers149.6 × 63.5 mm

Esp p148-3way crossover retuned quad smd
nict41/crossover
An EasyEDA-importable schematic for the 3-way state variable electronic crossover from Elliott Sound Products Project 148 ( ), redrawn from Figure 2.
90 parts - 2 layers292.1 × 525.8 mm

- 4 layers62.8 × 172 mm

Intensity pi
JQIamo/PI_wt_hold_for_laser_intensity_lock
PI controller with integrator hold control for laser intensity lock.
127 parts1 - 2 layers100 × 82 mm

- 2 layers85.1 × 130.8 mm

- 2 layers83 × 54 mm

- 2 layers133.4 × 61 mm

Questions
How big is the UltrasoundDriver PCB?
It measures 137.3 × 46.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UltrasoundDriver use?
52 parts, built around the MC33079D, L7815, L7915 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UltrasoundDriver KiCad files?
From the DillBaggins/ultrasonicDriverPCB repository on GitHub, at the commit this page was made from: the board is UltrasoundDriver.kicad_pcb and its schematic UltrasoundDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UltrasoundDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask DillBaggins before reusing the design.