Skip to the content
123

L7915

OSENExtended

0℃~+125℃@(Tj) 1 1.5A 15V 250uV 2V@(1A) 30V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
osen/L7915
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220ST
Pins
3
In stock
450 at JLCPCB (C22378640)
Used on
14 open-source boards

Overview

The L7915 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by OSEN in a TO-220ST package with 3 pins. 0℃~+125℃@(Tj) 1 1.5A 15V 250uV 2V@(1A) 30V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:L7915, from KiCad's library) and its footprint (EasyEDA_Cloud:TO-220F-3_L10.2-W4.7-P2.54-L, from EasyEDA), ready for a KiCad board. 450 are in stock at JLCPCB (part C22378640). 14 open-source boards in 13 repositories on GitHub use it.

Symbol

1GND2VI3VO
Regulator_Linear:L7915From KiCad's library

Footprint

123
EasyEDA_Cloud:TO-220F-3_L10.2-W4.7-P2.54-LFrom EasyEDA

Pinout

3
The pins of the L7915
PinNameType
1GNDPower in
2VIPower in
3VOPower out

Open-source boards using it

14See all 14
  • 2 layers292.1 × 525.8 mmStar Wars Vector PCB, the printed circuit board in 3D

    Star Wars Vector PCB

    Mazamars312/Analogue_Star_Wars

    Analogue_Star_Wars

    352 parts7
  • 4 layers62.8 × 172 mmIntensity pi, the printed circuit board in 3D

    Intensity pi

    JQIamo/PI_wt_hold_for_laser_intensity_lock

    PI controller with integrator hold control for laser intensity lock.

    127 parts1
  • 2 layers137.3 × 46.2 mmUltrasoundDriver, the printed circuit board in 3D

    UltrasoundDriver

    DillBaggins/ultrasonicDriverPCB

    52 parts
  • 2 layers100 × 82 mmSmu pwr 1, the printed circuit board in 3D

    Smu pwr 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    42 parts244
  • 2 layers85.1 × 130.8 mmKraft, the printed circuit board in 3D

    Kraft

    spielhuus/elektrophon

    Modular analog electro acoustic noise machine.

    43 parts32
  • 2 layers83 × 54 mmPreamp, the printed circuit board in 3D

    Preamp

    PeraZver/80W-Audio-Amplifier

    55 parts7
  • 2 layers133.4 × 61 mmDelSol PSU, the printed circuit board in 3D

    DelSol PSU

    dzavalishin/hardware

    Misc smart house hardware

    63 parts3
  • 2 layers122.6 × 50.8 mmDelSol PSU, the printed circuit board in 3D

    DelSol PSU

    dzavalishin/hardware

    Misc smart house hardware

    67 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L7915?

Yes. The symbol is Regulator_Linear:L7915 and the footprint EasyEDA_Cloud:TO-220F-3_L10.2-W4.7-P2.54-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L7915?

TO-220ST, with 3 pins. Its footprint is drawn on this page.

Where is the L7915 datasheet?

OSEN publishes it: the Datasheet link on this page opens it.

Where can I order the L7915?

JLCPCB lists it as part C22378640, with 450 in stock; the sellers' links on this page open their listings.

What can replace the L7915?

Parts like it in the library: the L7815CV-DG by STMicroelectronics, the L7915CV-DG by STMicroelectronics, the L7815CD2T-TR by STMicroelectronics and the L7915CV by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L7915?

14 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.