

https://jlcpcb.com/
- Size
- 55 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 129
- Pads
- 410
- Tracks, vias
- 983, 119
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jun 2020
- Updated
- 6 Nov 2020
Overview
DMX usb is an open-source printed circuit board by arneman44, from the arneman44/4Port-usb-DMX-adaptor repository on GitHub. It is a 2-layer board of 55 × 99.1 mm with 79 parts on 129 nets, routed with 983 tracks and 119 vias.
It is built around the FT232RL and FE1.1S. Its parts include 23 capacitors, 21 resistors, 13 connectors, 9 ICs and 8 diodes.
Main components
2README
README.md4Port usb DMX adaptor
As a beginning lighting tech at my local youth club. I needed a cheap way to control some lighting fixtures via DMX. That's why I created this USB-DMX dongle that's open-source so my fellow DIYers can build one themself. I will be selling these as PCB's, kits, and assembled units. At what I find a very reasonable price.
More info can be found on: https://nortle.be/15-diy-4-port-usb-dmx/
i used JCLPCB for ordering pcb's: https://jlcpcb.com/
4 Port USB to DMX adaptor by Arne Van den Broeck is licensed under CC BY-NC-SA 4.0
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6, C7, C8, C9, C13, C14, C15, C20, C21, C22, C23 |
| 8 | 560 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R5, R9, R11, R12, R14, R15, R17 |
| 8 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R6, R7, R8, R18, R19, R20, R21 |
| 4 | 10nf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C16, C17, C18, C19 |
| 4 | 130 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R10, R13, R16 |
| 4 | 4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C5, C10, C11, C12 |
| 4 | 75176B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U6, U7, U8 |
| 4 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1, U3, U4, U5 |
| 4 | Polyfuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2, F3, F4 |
| 4 | USB_C | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J13, J14, J15, J16 |
| 4 | XLR3 | Connector_Audio:Jack_XLR_Neutrik_NC3FAH1_Horizontal | J3, J4, J5, J6 |
| 3 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4 |
| 3 | DMX | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J10, J11, J12 |
| 1 | 2.7K | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | Crystal | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | DMX | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J9 |
| 1 | FE1.1S | SamacSys_Parts:SOP64P600X175-28N | IC1 |
| 1 | USB | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J17 |
Similar boards
- 2 layers103 × 100 mm

- 2 layers66 × 61.1 mm

USH
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
76 parts - 2 layers103.3 × 63.7 mm

- 2 layers89.5 × 31 mm

Flowing dongle
ugokutennp/flowing-dongle-ccd
DIY Multiple Connection Watchman Dongle for SteamVR
36 parts73MIT - 2 layers118.7 × 72.5 mm

FRMW Expansion stuff
a-little-wifi/frmw-16-MXM-E-port
MXM GPU + Dell E-Port dock adapter for 16" Framework laptop expansion bay
93 parts17 - 2 layers135.1 × 85.8 mm

Winchester
yoonjustin/WinchesterPCB
Open source JAMMA supergun project. KiCAD PCB design files
89 parts10MIT - 2 layers103.1 × 125.6 mm

Esp32 usb hid 0805
adamwuqwq/esp32-macropad
A low budget macro numpad based on ESP32 and CH9329.
118 parts8MIT - 4 layers95.2 × 67.5 mm

Questions
How big is the DMX usb PCB?
It measures 55 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DMX usb use?
79 parts, built around the FT232RL and FE1.1S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DMX usb KiCad files?
From the arneman44/4Port-usb-DMX-adaptor repository on GitHub, at the commit this page was made from: the board is PCB/DMX_usb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DMX usb design in my own project?
Its repository states no licence, so its author keeps all rights: ask arneman44 before reusing the design.