4 layers101.5 × 44.8 mm
6 layers
Gamen
ArnavMK/WaveForge4A fully custom Solid State Hybrid Guitar Amplifier
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 186
- Pads
- 349
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Feb 2026
- Updated
- 25 Sep 2026
Overview
Gamen is an open-source printed circuit board by ArnavMK, from the ArnavMK/WaveForge repository on GitHub. It is a 6-layer board with 19 parts on 186 nets.
It is built around the W25Q256JWPIQ, AS4C16M16SA-6TIN and TLP2361(E. Its parts include 7 ICs, 4 connectors, 2 capacitors, 2 resistors and 1 switch. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
3
W25Q256JWPIQ
WSON-8(5x6)-40℃~+85℃ 1.7V~1.95V 100,000 cycles 133MHz 1uA 20 Years 200ms@(64KB) 256Mbit 800us SPI WSON-8(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH
AS4C16M16SA-6TIN
TSOP-54-10.2mm-40℃~+85℃ 166MHz 256Mbit 3V~3.6V TSOP-54-10.2mm SDRAM ROHSAlliance MemorySDRAM
TLP2361(E
SO-6,5LEAD-40℃~+125℃ 1.5V 1.6mA 10mA 15Mbps 2.7V~5.5V 20kV/us 3.75kV 5V 6V 6mA 80ns 80ns DC SO-6,5LEAD Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12, C33 |
| 2 | 100Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R14 |
| 2 | ~ | Package_TO_SOT_SMD:SOT-23 | U5, U6 |
| 1 | 25MHz | Crystal:Crystal_SMD_WE_CFPX-180-4Pin_3.2x2.5mm | Y1 |
| 1 | AS4C16M16SA-6TIN | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U3 |
| 1 | Conn_01x05_Pin | Connector_Molex:Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J2 |
| 1 | MIDI CONN | Connector_Molex:Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | J4 |
| 1 | SCREEN CONN | Connector_Hirose:Hirose_DF12_DF12C3.0-30DS-0.5V_2x15_P0.50mm_Vertical | J5 |
| 1 | STM32H743IITx | Package_QFP:LQFP-176_24x24mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | RST1 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | TLP2361(E | Package_SO:SO-5-6_4.55x3.7mm_P1.27mm | U7 |
| 1 | TPS562201DDCR | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | TP_UARTTX | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | UART_Header | MyFootprints:CONN04_530480410_MOL | J3 |
| 1 | W25Q256JWPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U4 |
Questions
What parts does the Gamen use?
19 parts, built around the W25Q256JWPIQ, AS4C16M16SA-6TIN and TLP2361(E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gamen KiCad files?
From the ArnavMK/WaveForge repository on GitHub, at the commit this page was made from: the board is Hardware/gamen/gamen.kicad_pcb and its schematic Hardware/Gen/gen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gamen design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArnavMK before reusing the design.
More from ArnavMK/WaveForge
4- 4 layers115.6 × 54 mm
- 2 layers155.8 × 76.6 mm
- 2 layers83.8 × 41.3 mm
Similar boards
- 2 layers64 × 67 mm
- 4 layers100.9 × 77.5 mm
Ym2610-pcb
dan-rodrigues/ym2610-pcb
FPGA-based PCB to control a YM2610 sound synthesis chip.
168 parts31 - 4 layers70 × 70 mm
- 2 layers109.7 × 109.5 mm
- 2 layers77 × 70.5 mm
- 4 layers65.9 × 52.9 mm
- 4 layers119 × 63.2 mm
OpenChordM1
FugLong/OpenChord
An open-source music device for portable, expressive, and extensible audio creation.
75 parts3MIT - 2 layers140 × 76.9 mm
