4 layers115.6 × 54 mm
4 layers101.5 × 44.8 mm
Shori
ArnavMK/WaveForge4A fully custom Solid State Hybrid Guitar Amplifier
- Size
- 101.5 × 44.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 135
- Nets
- 149
- Pads
- 432
- Tracks, vias
- 763, 245
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Feb 2026
- Updated
- 25 Sep 2026
Overview
Shori is an open-source printed circuit board by ArnavMK, from the ArnavMK/WaveForge repository on GitHub. It is a 4-layer board of 101.5 × 44.8 mm with 135 parts on 149 nets, routed with 763 tracks and 245 vias.
It is built around the TLV9001IDCK, NE5532 and CS4272-CZZ, with the W25Q128JVSIQ and TPS73733DCQR among its other parts. Its parts include 52 capacitors, 45 resistors, 14 ICs, 6 connectors and 2 diodes. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
5
TLV9001IDCK
SC-70-5-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1 1.6mV 1.8V~5.5V 1MHz 2V/us 2pA 4.7nV/√Hz@1kHz 40mA 5pA 600nV/℃ 60uA 86dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational Amplifier
CS4272-CZZ
TSSOP-28-10℃~+70℃ 192kHz 2.37V~5.25V、3.1V~5.25V、4.75V~5.25V Encoder/decoder I2S、I2C、SPI TSSOP-28 Audio Interface ICs ROHSCirrus LogicAudio Interface ICs
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
TPS73733DCQR
SOT-223-6-40℃~+125℃@(Tj) 1 1A 3.3V 400uA 5.5V 500mV@(1A) 58dB@(100Hz) 89.1uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-223-6 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
135| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C6, C7, C8, C9, C10, C12, C18, C20, C21, C24, C25, C31, C34, C48, C49 |
| 13 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R5, R6, R7, R8, R9, R22, R23, R35, R37, R38, R46 |
| 11 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C17, C29, C30, C40, C41, C47, C50, C51, C53 |
| 7 | ~ | Package_TO_SOT_SMD:SOT-23-3 | U9, U10, U11, U12, U13, U14, U15 |
| 6 | 100Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R14, R42, R43, R44, R45 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C19, C26, C27, C32, C35 |
| 5 | 22Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R13, R15, R34 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17, R32, R33 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 3 | 470pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C37, C38, C45 |
| 2 | 100pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C28, C52 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13, C14 |
| 2 | 2.2K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C11 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C43, C46 |
| 2 | 634Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20, R21 |
| 2 | 91Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R19 |
| 2 | NE5532 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 0.01uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C39 |
| 1 | 1.33K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R25 |
| 1 | 1.5K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R29 |
| 1 | 1.5nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C44 |
| 1 | 100uF | MyFootprints:CAPMP6.3X3.2_2.8N_KEM | C15 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 10Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R39 |
| 1 | 12.288MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.32K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R27 |
| 1 | 2200pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C42 |
| 1 | 2700pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C36 |
| 1 | 330Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R36 |
| 1 | 33Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R41 |
| 1 | 4.42K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R26 |
| 1 | 4.99K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R28 |
| 1 | 430450200 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | 47K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R31 |
| 1 | 47uF | Capacitor_SMD:C_1206_3216Metric | C23 |
| 1 | 530480310 | MyFootprints:MOLEX_530480310 | J6 |
| 1 | 530480310 | My footprints:MOLEX_530480310 | J4 |
| 1 | 560Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R30 |
| 1 | 6.8nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C22 |
| 1 | 715Ω | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24 |
| 1 | CS4272 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U1 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J5 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D2 |
| 1 | LOGO | MyFootprints:logo | G*** |
| 1 | LOGO | My footprints:luff1 | G*** |
| 1 | STM32H750VBTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | RST1 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | p |
| 1 | TLV9001IDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U7 |
| 1 | TPS73733DCQR | MyFootprints:IC_TPS73733DCQR | U5 |
| 1 | TP_3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | TP_3V3A | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TP_5V | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TP_5VA | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | TP_MCLK | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | TP_UARTTX | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | GND |
| 1 | UART_Header | MyFootprints:MOLEX_530480310 | J3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U6 |
Questions
How big is the Shori PCB?
It measures 101.5 × 44.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Shori use?
135 parts, built around the TLV9001IDCK, NE5532, CS4272-CZZ and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shori KiCad files?
From the ArnavMK/WaveForge repository on GitHub, at the commit this page was made from: the board is Hardware/shori/shori.kicad_pcb and its schematic Hardware/Gen/gen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shori design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArnavMK before reusing the design.
More from ArnavMK/WaveForge
4- 2 layers155.8 × 76.6 mm
- 2 layers83.8 × 41.3 mm
- 6 layers
Similar boards
- 2 layers173 × 85 mm
Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 4 layers85.4 × 106.8 mm
BioSense
KrystianRuszczak/BioSense
The hardware design files in this directory are licensed under CERN-OHL-P-2.0. See LICENSE.
92 partsMIT - 2 layers95 × 70 mm
Ltl
ThomasStolt/LongTermEnvLogger
The aim of this project is to measure, store, display and evaluate the temperature in the rooms of a large building over an extended time period. This project has 2 main components:
62 parts - 4 layers47.9 × 50.8 mm
- 4 layers40 × 36.8 mm
- 4 layers88.9 × 68.6 mm
SuperAudioBoard
whollender/SuperAudioBoard
High quality, 24-bit audio codec board for Teensy 3.x
288 parts75 - 4 layers76 × 100 mm
- 2 layers83.1 × 57.6 mm
