Skip to the content
2 layers76.6 × 57.4 mmDivtiesus acer, the printed circuit board in 3D

Custom 2-layer PCB re-layout of DivTIESUS — a DivMMC SD card interface for the ZX Spectrum, with the upstream CPLD firmware unchanged.

Size
76.6 × 57.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
140
Pads
381
Tracks, vias
1,788, 349
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Jun 2026
Updated
23 Jun 2026

Overview

Divtiesus acer is an open-source printed circuit board by arleybls, from the arleybls/divtiesus-acer repository on GitHub. It is a 2-layer board of 76.6 × 57.4 mm with 42 parts on 140 nets, routed with 1,788 tracks and 349 vias.

It is built around the EPM240T100C3, ESP-12E and 74HCT165D, with the LM1117MP-3.3 among its other parts. Its parts include 15 capacitors, 8 resistors, 6 ICs, 3 connectors and 2 switches. It belongs with the retro computing and games and fPGA and programmable logic boards and the ESP8266 and FPGA and CPLD boards of this library.

Main components

4

README

README.md

divtiesus-acer

A custom-PCB fork of DivTIESUS — a DivMMC-compatible SD/MMC card interface for the ZX Spectrum.

This fork is a board re-layout only: the CPLD firmware and its pinout are unchanged from upstream, so the existing logic runs on the new PCB without modification.

divtiesus-acer assembled board

Lineage

StageAuthorRepo
Original DivTIESUSMiguel Ángel Rodríguez Jodar (mcleod-ideafix)https://github.com/mcleod-ideafix/divtiesus
KiCad redesign ("maple" edition)anarsoulhttps://github.com/anarsoul/divtiesus_maple
This fork (divtiesus-acer)—custom PCB re-layout based on the maple edition

What is unchanged from upstream

The entire cpld/ directory matches the maple edition:

  • Same Verilog sources: tld_divtiesus.v, divmmc_mcleod.v, modo.v, segajoy.v, tres_e.v, uart.v, zxunoregs.v, zxunouart.v
  • Same config.vh and Makefile
  • Same tld_divtiesus.qsf pin map — target device Altera MAX II EPM240T100C5

Inherited feature set:

  • DivMMC-compatible interface with 8 KiB EEPROM and 128 KiB or 512 KiB RAM
  • Automatic Spectrum model detection (no jumpers/switches)
  • 24 MHz independent clock
  • microSD card support with activity LED
  • NMI and RESET buttons (file browser access)
  • Optional ZX-Uno-compatible UART for WiFi (115200 baud)
  • Kempston joystick interface (Atari and Sega controllers)
  • Soft +3E feature removed (as in the maple edition)

License

GPLv3, inherited from the upstream sources (see the GPL headers in cpld/tld_divtiesus.v and the ZX-Uno notice in cpld/config.vh).

Parts

42
QtyValueFootprintReferences
12100nFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C6, C7, C8, C11, C12, C13, C15
310KResistor_SMD:R_Array_Convex_4x0603RN1, RN2, RN3
310KResistor_SMD:R_0603_1608MetricR1, R4, R6
310uFCapacitor_SMD:C_0805_2012MetricC9, C10, C14
21KResistor_SMD:R_0603_1608MetricR8, R10
2510Resistor_SMD:R_0603_1608MetricR9, R11
122KResistor_SMD:R_0603_1608MetricR5
124MHzOscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mmX1
128C64Package_SO:SOIC-28W_7.5x17.9mm_P1.27mmU3
1628128Package_SO:SSOP-32_11.305x20.495mm_P1.27mmU2
174HCT165DPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU6
1EPM240T100Package_QFP:TQFP-100_14x14mm_P0.5mmU1
1ESP-12ERF_Module:ESP-12EU4
1JTAGConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1
1JoystickConnector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ2
1LM1117MP-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1LOGOLOGOG***
1NMIButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW2
1RESETButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW1
1SD ActLED_SMD:LED_0805_2012MetricD1
1SD_CardConnector_Card:microSD_HC_Hirose_DM3D-SFJ3
1SWITCH_SMD_6PINMy Footprint Library:SWICTH_SMD_6PJUMPER_E2
1ZXBUSDivTiesus Orig:CONECTOR_SIMPLE_CARAZ1

Similar boards

  • 2 layers99.1 × 99.7 mmRC6502 General Video Adapter, the printed circuit board in 3D

    RC6502 General Video Adapter

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    80 parts193GPL-3.0
  • 2 layers69.9 × 96.1 mmZxsd, the printed circuit board in 3D

    Zxsd

    sittner/tinyfs

    TinyFS is a minimalist filesystem designed for extremely constrained embedded systems. The initial reason to create this project was the attempt to build a filesystem that can run on a ZX81 without any additional…

    37 parts3GPL-3.0
  • 2 layers115.1 × 71.6 mmH10 Controller, the printed circuit board in 3D

    H10 Controller

    tlsystems/H10-Controller

    25 parts1
  • 2 layers55.9 × 99.7 mmYatabaza keyboard, the printed circuit board in 3D

    Yatabaza keyboard

    ycwn/yatabaza

    An 8bit synthesizer based on YM3812

    47 parts1GPL-3.0
  • 4 layers161.1 × 82.9 mmAll in one smc, the printed circuit board in 3D

    All in one smc

    nojan1/project-wrass

    The purpose of Project Wrass is to develop the Wrass 1.

    150 parts
  • 2 layers218 × 125 mmEVA1 v2, the printed circuit board in 3D

    EVA1 v2

    roberto314/EVA-1_Reproduction

    Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer

    160 parts
  • 2 layers213 × 65 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    195 parts195MIT

Questions

How big is the Divtiesus acer PCB?

It measures 76.6 × 57.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Divtiesus acer use?

42 parts, built around the EPM240T100C3, ESP-12E, 74HCT165D and LM1117MP-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Divtiesus acer KiCad files?

From the arleybls/divtiesus-acer repository on GitHub, at the commit this page was made from: the board is divtiesus-acer.kicad_pcb and its schematic divtiesus-acer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Divtiesus acer design in my own project?

Its repository states no licence, so its author keeps all rights: ask arleybls before reusing the design.