Skip to the content
2 layers55.9 × 99.7 mmYatabaza keyboard, the printed circuit board in 3D

Yatabaza keyboard

ycwn/yatabaza1

An 8bit synthesizer based on YM3812

Size
55.9 × 99.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
32
Pads
156
Tracks, vias
286, 25
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
13 Apr 2021
Updated
17 May 2022

Overview

Yatabaza keyboard is an open-source printed circuit board by ycwn, from the ycwn/yatabaza repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.9 × 99.7 mm with 47 parts on 32 nets, routed with 286 tracks and 25 vias.

It is built around the 74HC04D and 74HCT165D. Its parts include 13 connectors, 10 capacitors, 8 resistors, 8 switches and 2 ICs. It belongs with the keyboards and input boards of this library.

Main components

2

README

README.md

yatabaza

Parts

47
QtyValueFootprintReferences
810nCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2, C3, C4, C5, C6, C7, C8
81kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1, R2, R3, R4, R5, R6, R7, R8
8SCREWMountingHole:MountingHole_3.5mm_PadP2, P3, P4, P5, P10, P11, P12, P13
2100nCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC9, C10
21kResistor_THT:R_Array_SIP5RN1, RN2
2BYPASSJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP3
2LOOPBACKJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2, JP4
174HC04Package_DIP:DIP-14_W7.62mmU9
174HCT165Package_DIP:DIP-16_W7.62mmU1
1C#_F_A_0Button_Switch_THT:SW_PUSH-12mmSW3
1C#_F_A_1Button_Switch_THT:SW_PUSH-12mmSW4
1C_E_G#_0Button_Switch_THT:SW_PUSH-12mmSW1
1C_E_G#_1Button_Switch_THT:SW_PUSH-12mmSW2
1D#_G_B_0Button_Switch_THT:SW_PUSH-12mmSW7
1D#_G_B_1Button_Switch_THT:SW_PUSH-12mmSW8
1D_F#_A#_0Button_Switch_THT:SW_PUSH-12mmSW5
1D_F#_A#_1Button_Switch_THT:SW_PUSH-12mmSW6
1KBD_INConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalP6
1KBD_OUTConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalP1
1LDIConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1LDOConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1LEDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ3

More from ycwn/yatabaza

5
  • 2 layers46.4 × 60.3 mmYatabaza power, the printed circuit board in 3D

    Yatabaza power

    ycwn/yatabaza

    An 8bit synthesizer based on YM3812

    34 parts1GPL-3.0
  • 2 layers46.4 × 60.3 mmYatabaza synth, the printed circuit board in 3D

    Yatabaza synth

    ycwn/yatabaza

    An 8bit synthesizer based on YM3812

    32 parts1GPL-3.0
  • 2 layers46.4 × 60.3 mmYatabaza cpu, the printed circuit board in 3D

    Yatabaza cpu

    ycwn/yatabaza

    An 8bit synthesizer based on YM3812

    28 parts1GPL-3.0
  • 2 layers94 × 65.4 mmYatabaza bus, the printed circuit board in 3D

    Yatabaza bus

    ycwn/yatabaza

    An 8bit synthesizer based on YM3812

    26 parts1GPL-3.0
  • 2 layers46.4 × 60.3 mmYatabaza amp, the printed circuit board in 3D

    Yatabaza amp

    ycwn/yatabaza

    An 8bit synthesizer based on YM3812

    10 parts1GPL-3.0

Similar boards

  • 2 layers99.1 × 99.7 mmRC6502 General Video Adapter, the printed circuit board in 3D

    RC6502 General Video Adapter

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    80 parts193GPL-3.0
  • 2 layers76.6 × 57.4 mmDivtiesus acer, the printed circuit board in 3D

    Divtiesus acer

    arleybls/divtiesus-acer

    Custom 2-layer PCB re-layout of DivTIESUS — a DivMMC SD card interface for the ZX Spectrum, with the upstream CPLD firmware unchanged.

    42 parts3
  • 2 layers69.9 × 96.1 mmZxsd, the printed circuit board in 3D

    Zxsd

    sittner/tinyfs

    TinyFS is a minimalist filesystem designed for extremely constrained embedded systems. The initial reason to create this project was the attempt to build a filesystem that can run on a ZX81 without any additional…

    37 parts3GPL-3.0
  • 2 layers115.1 × 71.6 mmH10 Controller, the printed circuit board in 3D

    H10 Controller

    tlsystems/H10-Controller

    25 parts1
  • 4 layers161.1 × 82.9 mmAll in one smc, the printed circuit board in 3D

    All in one smc

    nojan1/project-wrass

    The purpose of Project Wrass is to develop the Wrass 1.

    150 parts
  • 2 layers218 × 125 mmEVA1 v2, the printed circuit board in 3D

    EVA1 v2

    roberto314/EVA-1_Reproduction

    Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer

    160 parts
  • 2 layers213 × 65 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    195 parts195MIT

Questions

How big is the Yatabaza keyboard PCB?

It measures 55.9 × 99.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Yatabaza keyboard use?

47 parts, built around the 74HC04D and 74HCT165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yatabaza keyboard KiCad files?

From the ycwn/yatabaza repository on GitHub, at the commit this page was made from: the board is hardware/keyboard/yatabaza-keyboard.kicad_pcb and its schematic hardware/amp/yatabaza-amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yatabaza keyboard design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).