2 layers22.9 × 41.7 mm
Vextrex Buzz Fix
arithmaldor/Vectrex-Buzz-Kit
Board for reducing audio buzz in the Vectrex. Circuit from Console5.com
11 parts6
2 layers19.8 × 37.1 mm
Vextrex Buzz Fix
arithmaldor/Vectrex-Buzz-Kit6Board for reducing audio buzz in the Vectrex. Circuit from Console5.com
- Size
- 19.8 × 37.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 6
- Pads
- 23
- Tracks, vias
- 34, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Jun 2018
- Updated
- 8 Jun 2020
Overview
Vextrex Buzz Fix is an open-source printed circuit board by arithmaldor, from the arithmaldor/Vectrex-Buzz-Kit repository on GitHub. It is a 2-layer board of 19.8 × 37.1 mm with 11 parts on 6 nets, routed with 34 tracks and 6 vias.
It is built around the TL082. Its parts include 3 resistors, 2 capacitors and 1 IC.
Main components
1README
README.mdCopyright and Disclaimer
Copyright: Jacob Proctor 2018
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Buzz Fix Kit
Use this board to make assembly of the buzz fix kit a bit easier. I have included an SMD version as well as a THT version. The THT version can be used with the kit sold on Console5.com here:https://console5.com/store/vectrex-de-buzz-kit.html
See https://console5.com/wiki/Vectrex_PreAmp_Buzz_Reduction for more informationa about the circuit.
Credit to Console5.com and Bill Seiler for the schematic
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | +5V | Wire_Pads:SolderWirePad_single_SMD_5x10mm | +5 |
| 1 | -5V | Wire_Pads:SolderWirePad_single_SMD_5x10mm | -5 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 200K | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 33K | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | GND | Wire_Pads:SolderWirePad_single_SMD_5x10mm | GND |
| 1 | IN | Wire_Pads:SolderWirePad_single_SMD_5x10mm | IN |
| 1 | OUT | Wire_Pads:SolderWirePad_single_SMD_5x10mm | OUT |
| 1 | TL082 | digikey-footprints:SOIC-8_W3.9mm | U1 |
More from arithmaldor/Vectrex-Buzz-Kit
1Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers130.6 × 112 mm
- 2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT - 2 layers60 × 50 mm
- 2 layers79 × 107 mm
Eurorack spinfx
grappendorf/eurorack-spinfx
Spin FV-1 based effects module for Eurorack systems
80 parts16 - 2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16
Questions
How big is the Vextrex Buzz Fix PCB?
It measures 19.8 × 37.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vextrex Buzz Fix use?
11 parts, built around the TL082. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vextrex Buzz Fix KiCad files?
From the arithmaldor/Vectrex-Buzz-Kit repository on GitHub, at the commit this page was made from: the board is Vectrex Buzz Kit - SMD/Vextrex Buzz Fix.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vextrex Buzz Fix design in my own project?
Its repository states no licence, so its author keeps all rights: ask arithmaldor before reusing the design.