
Trinket
A simple Raspi Pico based dev board of sorts, with a SSD1306 screen & 3 buttons
- Size
- 65 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 45
- Pads
- 142
- Tracks, vias
- 125, 2
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Oct 2024
- Updated
- 4 Nov 2026
Overview
Trinket is an open-source printed circuit board by arijitdasgupta, from the arijitdasgupta/talisman repository on GitHub. It is a 2-layer board of 65 × 90 mm with 21 parts on 45 nets, routed with 125 tracks and 2 vias.
It is built around the MCP73831T-2ACI/OT-HXY and DMP1045U. Its parts include 9 connectors, 4 switches, 2 capacitors, 2 resistors and 2 ICs. It belongs with the RP2040 boards of this library.
Main components
2README
README.mdTalisman
In at attempt to teach myself how to design PCBs, I made this trinket thingie to share with my friends. The board runs RP2040, and I am going to make some games for it.
Games that run on this
Features
- I2C SSD1306 based display
- Raspberry Pi Pico brain
- 3 x buttons
- Shared power between battery & USB
- Battery charging
- 3D printable case
Notes
The manufacturing process with PCB makers such as JLCPCB is a little convoluted, even though I added BOM, drills and rotation files those may not be usable for you. But the general schematic designs and part ids should be helpful if you decide to make one yourself. If you have any questions, do drop a note. I have purposefully omitted writing a build guide for this very reason, but I am happy to write on up if anyone needs it.
TODO
- Write assembly instructions
What's Friday Makers Club?
TODO
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 4u7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C3 |
| 1 | BATT | footprints:BATT | J7 |
| 1 | BATT_ALT | footprints:BATT_TH | J9 |
| 1 | Center | Button_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW3 |
| 1 | DEBUG_UART | footprints:PinHeader_DEBUG | J8 |
| 1 | DMP1045U | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | LED | LED_SMD:LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D1 |
| 1 | Left | Button_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW2 |
| 1 | MCP73831T-2ACI_OT | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | MountingHole1 | MountingHole:MountingHole_2.2mm_M2_Pad | J3 |
| 1 | MountingHole2 | MountingHole:MountingHole_2.2mm_M2_Pad | J4 |
| 1 | MountingHole3 | MountingHole:MountingHole_2.2mm_M2_Pad | J5 |
| 1 | MountingHole4 | MountingHole:MountingHole_2.2mm_M2_Pad | J6 |
| 1 | OLED1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | OLED2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Right | Button_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW4 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
Similar boards
- 2 layers79.2 × 59.2 mm

- 2 layers99.7 × 99.7 mm

ESP32-eyal
makehackvoid/ESP8266Lib
I decided to make a PCB for my ESP32 things. I have many installed, each made differently. It is time to standardise them, hence this KiCAD (6) project. ======
37 parts13 - 2 layers77.2 × 67.9 mm

Transistor tester
vitaliy-bobrov/avr-transistor-tester
Component/Transistor tester based on famous AVR Transistor Tester
66 parts12 - 2 layers95 × 185 mm

Calculator
AnhadSawhney/MechanicalKeyCalculator
These are the CAD files for a calculator with mechanical keyswitches.
151 parts1MIT - 2 layers100 × 87 mm

- 2 layers31.5 × 75 mm

- 2 layers39.4 × 52.1 mm

- 2 layers85 × 75 mm

Esp8266
Hackuarium/esp-12e
PWM on all the pins ! HSPI (screen or other): 12 13 14 15 PWM: R12 G15 B13 ADC: TOUT I2C: SCL14 SDA2
62 parts
Questions
How big is the Trinket PCB?
It measures 65 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Trinket use?
21 parts, built around the MCP73831T-2ACI/OT-HXY and DMP1045U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trinket KiCad files?
From the arijitdasgupta/talisman repository on GitHub, at the commit this page was made from: the board is pcb/trinket/trinket.kicad_pcb and its schematic pcb/trinket/trinket.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trinket design in my own project?
Its repository states no licence, so its author keeps all rights: ask arijitdasgupta before reusing the design.