2 layers85 × 56 mm
2 layers45.3 × 37.1 mm
Programmer
AriB2003/aero1Olin Aero
- Size
- 45.3 × 37.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 67
- Pads
- 218
- Tracks, vias
- 637, 55
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Feb 2024
- Updated
- 23 Oct 2025
Overview
Programmer is an open-source printed circuit board by AriB2003, from the AriB2003/aero repository on GitHub. It is a 2-layer board of 45.3 × 37.1 mm with 43 parts on 67 nets, routed with 637 tracks and 55 vias.
It is built around the 93C46C-E/P, AMS1117-3.3 and FT2232HL, with the NUP2202W1, BLM18KG121TN1D and ISM92-3351AH-12.000MHZ among its other parts. Its parts include 14 capacitors, 12 resistors, 5 connectors, 4 ICs and 4 diodes. It belongs with the interfaces and adapters boards of this library.
Main components
7
93C46C-E/P
PDIP-8-40℃~+125℃ 1Kbit 2ms 3MHz 4.5V~5.5V PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorised
NUP2202W1
SC-88-40℃~+125℃ 1.5pF、3pF、3pF、5pF 20V 500W 5V 5uA 6V 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
BLM18KG121TN1D
06031 120Ω@100MHz 30mΩ 3A ±25% 0603 Ferrite Beads ROHSMurataFerrite Beads
ISM92-3351AH-12.000MHZ
SMD5032-4PCrystal OscillatorsILSI
SFH11-PBPC-D07-ST-BK
插件,P=2.54mm-40℃~+105℃ 14P 2 2.54mm 2.54mm 3A 8.51mm Brass Gold Square Hole Through Hole 插件,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C6, C7, C9, C11, C12, C13, C14, C15 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R9, R10 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13 |
| 2 | BLM18KG121TN1D | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 2 | Conn_02x8_Pin | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5, J6 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 3.3uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 93C46C | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J3 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | FT2232HL | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | ISM92-3351AH-12.000MHZ | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSoldering | X1 |
| 1 | NUP2202 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
| 1 | RX_LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SFH11-PBPC-D07-ST-BK | programmer:SULLINS_SFH11-PBPC-D07-ST-BK | J2 |
| 1 | SW_DPST | programmer:DPDT | SW1 |
| 1 | TX_LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J1 |
| 1 | pwr | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
Questions
How big is the Programmer PCB?
It measures 45.3 × 37.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Programmer use?
43 parts, built around the 93C46C-E/P, AMS1117-3.3, FT2232HL and NUP2202W1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programmer KiCad files?
From the AriB2003/aero repository on GitHub, at the commit this page was made from: the board is Electrical 23-24/ESC FPGA/programmer/programmer.kicad_pcb and its schematic Electrical 23-24/2 Axis Gimbal/2 Axis Gimbal/2 Axis Gimbal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask AriB2003 before reusing the design.
More from AriB2003/aero
6- 4 layers130 × 130 mm
- 2 layers44.5 × 26.4 mm
- 2 layers72.6 × 89.9 mm
- 2 layers28.4 × 79.2 mm
- 2 layers16.8 × 32.3 mm
Similar boards
- 4 layers95 × 76.2 mm
- 2 layers38 × 20.7 mm
JTAG HW
vanbwodonk/ft2232hl-jtag-clone
Digilent JTAG clone hardware + eeprom firmware (.bin)
38 parts73 - 2 layers73.3 × 66.6 mm
- 4 layers180 × 160 mm
PCE colorlight carrier
supermomo31/PCE_colorlight_carrier
console PCE depuis un FPGA format SODIMM : colorlight i5
258 parts - 2 layers153.8 × 38.9 mm
Farallon EtherMac LC Comm Slot Card 10Base T v1.0
alxlab-zone66x/Macintosh-Comm-Slot-I-Ethernet-Card
This is a reproduction of the Farallon LC Comm Slot Ethernet Card.
67 parts2 - 2 layers170 × 55 mm
Protector de Tesoro
edgranzella/Protector-de-Tesoro
Este repositorio contiene el diseño de hardware y la placa de circuito impreso (PCB) desarrollado en KiCad para el módulo central del Protector de Tesoro.
88 parts - 2 layers50 × 50 mm
- 2 layers50 × 60 mm
