

PCBDrone
Olin Aero
- Size
- 130 × 130 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 61
- Pads
- 244
- Tracks, vias
- 351, 96
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Feb 2024
- Updated
- 23 Oct 2025
Overview
PCBDrone is an open-source printed circuit board by AriB2003, from the AriB2003/aero repository on GitHub. It is a 4-layer board of 130 × 130 mm with 90 parts on 61 nets, routed with 351 tracks and 96 vias.
It is built around the ESP32-WROOM-32E, BMI323 and TS04-66-50-BK-260-SMT, with the AP7366-W5 among its other parts. Its parts include 20 capacitors, 9 resistors, 6 ICs, 2 connectors and 2 switches. It belongs with the ESP32 boards of this library.
Main components
4ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesBMI323
LGA-14-40℃~+85℃ IMU (accelerometer + gyroscope) Motion event detection LGA-14 Accelerometers ROHSBosch SensortecAccelerometersTS04-66-50-BK-260-SMT
SMD-30℃~+80℃ 12V 2.6N 50mA 5mm 60,000 cycles 6mm 6mm Gull Wing Round Button SPST-NO Surface Mount,Vertical Without Bracket SMD Tactile Switches ROHSCUITactile SwitchesAP7366-W5
SOT-25-40℃~+85℃@(Ta) 1 300mV@(600mA) 600mA 60uA 6V 75dB@(1kHz) 800mV~5V Adjustable Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C9, C10, C12, C13, C15, C16, C18, C19, C20 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C8, C11, C14, C17 |
| 4 | DRV8210DSGR | footprints:DSG0008A-IPC_A | U3, U4, U5, U6 |
| 4 | Motor Mount | MountingHole:MotorMount | Motor Mount, Motor Mount, Motor Mount, Motor Mount |
| 2 | TS04-66-50-BK-260-SMT | footprints:SW_TS04-66-50-BK-260-SMT | S1, S2 |
| 1 | AP7366 | footprints:AP7366-33W5-7 | VR1 |
| 1 | BMI323 | footprints:BMI323_BOS | U2 |
| 1 | Conn_01x02_Pin | footprints:JST_B2B-PH-SM4-TB | J1 |
| 1 | Conn_01x04 | footprints:JST_B4B-PH-SM4-TB | J2 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | IMU_CSB(UNUSED) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | IMU_GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6 |
| 1 | IMU_GNDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | IMU_INT1(UNUSED) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP9 |
| 1 | IMU_INT2(UNUSED) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5 |
| 1 | IMU_SCL | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | IMU_SDA | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | IMU_VDD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | IMU_VDDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP8 |
| 1 | LOGO | footprints:Logo | G*** |
| 1 | U3_GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP17 |
| 1 | U3_IN1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP13 |
| 1 | U3_IN2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP14 |
| 1 | U3_MODE | TestPoint:TestPoint_Pad_1.0x1.0mm | TP12 |
| 1 | U3_OUT1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP15 |
| 1 | U3_OUT2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP16 |
| 1 | U3_VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP11 |
| 1 | U3_VM | TestPoint:TestPoint_Pad_1.0x1.0mm | TP10 |
| 1 | U4_GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP23 |
| 1 | U4_IN1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP21 |
| 1 | U4_IN2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP22 |
| 1 | U4_MODE | TestPoint:TestPoint_Pad_1.0x1.0mm | TP20 |
| 1 | U4_OUT1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP24 |
| 1 | U4_OUT2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP25 |
| 1 | U4_VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP19 |
| 1 | U4_VM | TestPoint:TestPoint_Pad_1.0x1.0mm | TP18 |
| 1 | U5_GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP31 |
| 1 | U5_IN1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP29 |
| 1 | U5_IN2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP30 |
| 1 | U5_MODE | TestPoint:TestPoint_Pad_1.0x1.0mm | TP28 |
| 1 | U5_OUT1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP32 |
| 1 | U5_OUT2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP33 |
| 1 | U5_VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP27 |
| 1 | U5_VM | TestPoint:TestPoint_Pad_1.0x1.0mm | TP26 |
| 1 | U6_GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP39 |
| 1 | U6_IN1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP37 |
| 1 | U6_IN2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP38 |
| 1 | U6_MODE | TestPoint:TestPoint_Pad_1.0x1.0mm | TP36 |
| 1 | U6_OUT1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP40 |
| 1 | U6_OUT2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP41 |
| 1 | U6_VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP35 |
| 1 | U6_VM | TestPoint:TestPoint_Pad_1.0x1.0mm | TP34 |
The 86 most common of 90 parts.
More from AriB2003/aero
6- 2 layers85 × 56 mm

- 2 layers45.3 × 37.1 mm

- 2 layers44.5 × 26.4 mm

- 2 layers72.6 × 89.9 mm

- 2 layers28.4 × 79.2 mm

- 2 layers16.8 × 32.3 mm

Similar boards
- 2 layers51.5 × 92 mm

Ecoport bridge v1
jrowe88/ecoport-bridge
CTA-2045 (EcoPort) bridge for a Rinnai REHP65 heat pump water heater
74 parts1AGPL-3.0 - 4 layers66.3 × 43.2 mm

- 6 layers144 × 130 mm

- 4 layers93.7 × 43.7 mm

Flight Computer
SunDevilRocketry/Flight-Computer
General purpose flight computer for high powered rocketry projects.
113 parts5 - 4 layers70.8 × 100 mm

- 6 layers60 × 30 mm

Udsp card
crsknr/hw_udsp-card
A compact DSP development board for real-time embedded audio and sensing
221 parts2GPL-3.0 - 4 layers85 × 56 mm

Amr stm32 kicad
hongtannnn/amr_stm32
AMR Hardware & PCB Design: Low-level controller board and hardware system (STM32 / KiCad) engineered as the foundation for future ROS 2, SLAM, and autonomous navigation integration.
96 parts2 - 6 layers50 × 25 mm

Questions
How big is the PCBDrone PCB?
It measures 130 × 130 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PCBDrone use?
90 parts, built around the ESP32-WROOM-32E, BMI323, TS04-66-50-BK-260-SMT and AP7366-W5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCBDrone KiCad files?
From the AriB2003/aero repository on GitHub, at the commit this page was made from: the board is Electrical25-26/PCBDrone/Kicad/Kicad.kicad_pcb and its schematic Electrical 23-24/2 Axis Gimbal/2 Axis Gimbal/2 Axis Gimbal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCBDrone design in my own project?
Its repository states no licence, so its author keeps all rights: ask AriB2003 before reusing the design.