Skip to the content
12345

AP7366-W5

Diodes IncorporatedExtended

-40℃~+85℃@(Ta) 1 300mV@(600mA) 600mA 60uA 6V 75dB@(1kHz) 800mV~5V Adjustable Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
diodes/AP7366-W5
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-25
Pins
5
In stock
2,943 at JLCPCB (C2934600)
Used on
2 open-source boards

Overview

The AP7366-W5 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Diodes Incorporated in a SOT-25 package with 5 pins. -40℃~+85℃@(Ta) 1 300mV@(600mA) 600mA 60uA 6V 75dB@(1kHz) 800mV~5V Adjustable Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4ADJ_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,943 are in stock at JLCPCB (part C2934600). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1IN3EN5OUT2GND4ADJ
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4ADJ_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
2.2 V · IN, recommended operating min · p. 3
Supply, most
6 V · IN, recommended operating max · p. 3
Supply, absolute maximum
6.5 V · IN, absolute max · p. 3
Works from
-40 °C · operating ambient min · p. 3
Works up to
85 °C · operating ambient max · p. 3
Junction, hottest
150 °C · junction absolute max · p. 3
Takes working
60 µA · typical input quiescent current, enabled, no load · p. 4
Takes asleep
50 nA · typical shutdown current, VEN = 0 V, no load · p. 4
Gives
600 mA · recommended continuous output max · p. 3
Current limit
1 A · typical current limit, VIN = VOUT + 1 V · p. 4
Feedback reference
800 mV · typical ADJ reference, IOUT = 10 mA · p. 4
Junction to air (SOT25)
169 K/W · typical, FR-4 board, 1 oz copper, minimum recommended pads · p. 5
Junction to case (SOT25)
31 K/W · typical, FR-4 board, 1 oz copper, minimum recommended pads · p. 5

What it is and has

5
Output current
600mA, with enable · p. 1
Adjustable output
0.8V to 5.0V · p. 1
PSRR
75dB at 1kHz · p. 1
Protection
Current limit and short circuit · p. 1
Protection
Thermal shutdown · p. 1

Around it

3
cap 1μF
between IN and GND; Ceramic; place as close as possible to the device. Capacitance may be increased. · p. 8
cap at least 2.2μF
between OUT and GND; Ceramic, 10mΩ ≦ ESR ≦ 300mΩ; place as close as possible to OUT and GND. Application information specifies this value for stability, while the pin description and electrical test conditions use 1uF. · p. 8
res smaller than 80kΩ
between ADJ and GND; R2, lower resistor of the adjustable output divider. · p. 9

Specifications

54
ParameterConditionsAs printedPage
Human Body Model ESD Protection ESD HBMTA = +25°Cmax 2000 V3
Charged Device Model ESD CDMTA = +25°C; rating ±1000 Vmin -1000 · max 1000 V3
Input Voltage VINTA = +25°Cmax 6.5 V3
Storage Temperature Range TSTmin -65 · max 150 °C3
Maximum Junction Temperature TJmax 150 °C3
Input Voltage VINTA = +25°Cmin 2.2 · max 6 V3
Output Voltage VOUTTA = +25°Cmin 0.8 · max 5 V3
Output Current (Note 4) IOUTTA = +25°C; stable regulated output without load currentmin 0 · max 600 mA3
Operating Ambient Temperature TAmin -40 · max 85 °C3
ADJ Reference Voltage (Adjustable Version) VREFIOUT = 10mAmin 0.788 · typ 0.8 · max 0.812 V4
ADJ Leakage (Adjustable Version) IADJtyp 0.1 · max 0.5 uA4
Input Quiescent Current IQVEN = VIN, IOUT = 0mAtyp 60 · max 80 uA4
Input Shutdown Current ISHDNVEN = 0V, IOUT = 0mAmin -1 · typ 0.05 · max 1 uA4
Line Regulation VOUT/VIN/VOUTVIN = (VOUT +1V) to 5.5V, IOUT = 10mA, TA = +25°Ctyp 0.01 · max 0.1 %/V4
Line Regulation VOUT/VIN/VOUTVIN = (VOUT +1V) to 5.5V, IOUT = 10mA, -40°C ≦ TA ≦ +85°Cmax 0.2 %/V4
Load Regulation VOUT/VOUTIOUT = 1mA to 600mA, 1.2V < VOUT ≦ 3.9Vmin -1 · max 1 %4
Load Regulation VOUT/VOUTIOUT = 1mA to 600mA, 1.0V ≦ VOUT ≦ 1.2Vmin -1.5 · max 1.5 %4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.0V, IOUT = 300mAtyp 650 · max 900 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.2V, IOUT = 300mAtyp 480 · max 700 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.5V, IOUT = 300mAtyp 200 · max 340 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.8V, IOUT = 300mAtyp 160 · max 250 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 2.0V, IOUT = 300mAtyp 140 · max 200 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 2.5V, IOUT = 300mAtyp 125 · max 190 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 2.8V, IOUT = 300mAtyp 115 · max 180 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.0V, IOUT = 300mAtyp 110 · max 170 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.3V, IOUT = 300mAtyp 105 · max 160 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.6V, IOUT = 300mAtyp 105 · max 160 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.9V, IOUT = 300mAtyp 100 · max 150 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.0V, IOUT = 600mAtyp 850 · max 1200 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.2V, IOUT = 600mAtyp 800 · max 1000 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.5V, IOUT = 600mAtyp 450 · max 700 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 1.8V, IOUT = 600mAtyp 320 · max 420 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 2.0V, IOUT = 600mAtyp 285 · max 400 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 2.5V, IOUT = 600mAtyp 250 · max 380 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 2.8V, IOUT = 600mAtyp 230 · max 350 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.0V, IOUT = 600mAtyp 220 · max 330 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.3V, IOUT = 600mAtyp 210 · max 320 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.6V, IOUT = 600mAtyp 210 · max 320 mV4
Dropout Voltage (Note 5) VDROPOUTVOUT = 3.9V, IOUT = 600mAtyp 190 · max 290 mV4
PSRR (Note 6) PSRRf = 1kHz, IOUT = 100mAtyp 75 dB4
PSRR (Note 6) PSRRf = 10kHz, IOUT = 100mAtyp 55 dB4
Short-Circuit Current ISHORTVIN = VOUT + 1V, Output Voltage <15% of VOUTtyp 250 mA4
Start-Up Time tSTVOUT = 0V to 3.0V, RL = 30Ωtyp 150 us4
Current Limit ILIMITVIN = VOUT + 1Vmin 0.66 · typ 1 A4
EN Input Logic-Low Voltage VILVIN = VIN-Min to VIN-Maxmax 0.3 V4
EN Input Logic-High Voltage VIHVIN = VIN-Min to VIN-Max; maximum VINmin 1 V4
EN Input Leakage Current IENVIN = 5.5V or VEN = 0Vmin -0.1 · max 0.1 uA4
Thermal Shutdown Threshold TSHDNtyp 150 °C4
Thermal Shutdown Hysteresis THYStyp 20 °C4
EN Pulldown Resistor RENPDtyp 3 MΩ5
Output Discharge Resistor RPDVOL = 1Vtyp 100 Ω5
Output Voltage Temperature Coefficient VOUT/TA/VOUTIOUT = 100mA, -40°C ≤ TA ≤ +85°C; typical ±100 ppm/°Ctyp 100 ppm/°C5
Thermal Resistance Junction-to-Ambient JASOT25 (Note 7); FR-4 substrate PC board, 1oz copper, minimum recommended pad layouttyp 169 °C/W5
Thermal Resistance Junction-to-Case JCSOT25 (Note 7); FR-4 substrate PC board, 1oz copper, minimum recommended pad layouttyp 31 °C/W5

Pins, by the datasheet

5
1 IN
Voltage input; bypass to ground through at least 1uF MLCC capacitor. · p. 2
2 GND
Ground. · p. 2
3 EN
Enable input, active high. · p. 2
4 ADJ
Output feedback pin. · p. 2
5 OUT
Voltage output; bypass to ground through 1uF MLCC capacitor. · p. 2

Ordering codes, by the datasheet

1
AP7366-W5-7
SOT25 · Adjustable output; 3,000 pieces, 7’’ Tape & Reel · p. 10

Open-source boards using it

2
  • 4 layers66.3 × 43.2 mmSnn-4layers, the printed circuit board in 3D

    Snn-4layers

    RoyceRichmond/4layers-snn

    PCB for a spiking neuron

    78 parts
  • 4 layers130 × 130 mmPCBDrone, the printed circuit board in 3D

    PCBDrone

    AriB2003/aero

    Olin Aero

    90 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP7366-W5?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4ADJ_5OUT and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP7366-W5?

SOT-25, with 5 pins. Its footprint is drawn on this page.

Where is the AP7366-W5 datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP7366-W5?

JLCPCB lists it as part C2934600, with 2,943 in stock; the sellers' links on this page open their listings.

What can replace the AP7366-W5?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the TLV75733PDBV by Texas Instruments, the ME6217C33M5G by MICRONE and the AP2112K-3.3TRG1(MS) by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP7366-W5?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.