2 layers58 × 37.1 mm
Phils Lab #165
ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.
37 parts1
2 layers56.1 × 29.1 mm
MSPM0
Ar998-max/PCB-1-My 1st PCB
- Size
- 56.1 × 29.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 60
- Pads
- 231
- Tracks, vias
- 326, 211
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 Sep 2026
- Updated
- 19 Sep 2026
Overview
MSPM0 is an open-source printed circuit board by Ar998-max, from the Ar998-max/PCB-1- repository on GitHub. It is a 2-layer board of 56.1 × 29.1 mm with 37 parts on 60 nets, routed with 326 tracks and 211 vias.
It is built around the MSPM0G3507SPTR, CH340E and LIS2DH, with the SPX3819M5-L-3-3 and USBLC6-2SC6 among its other parts. Its parts include 14 capacitors, 8 resistors, 4 ICs, 2 connectors and 1 diode.
Main components
5
MSPM0G3507SPTR
LQFP-48(7x7)-40℃~+125℃ 1.62V~3.6V 128KB 32 Bit 32KB 44 80MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
LIS2DH
LGA-14(2x2)-40℃~+85℃ 1.71V~3.6V Accelerometer SPI、I2C X,Y,Z ±16g LGA-14(2x2) Accelerometers ROHSSTMicroelectronicsAccelerometers
SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.md"# PCB-1" I'm learning pcb designing, first pcb I've made. This board most probably isn't manufacturable due to some underlaying errors. It uses a TI MSPM0G3507 microcontroller.
3D view
Routing
Schematic
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 470 nf | Capacitor_SMD:C_01005_0402Metric | C1, C2, C5, C6, C8, C9, C10, C13, C14 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | MH1, MH2, MH3, MH4 |
| 3 | 5K1 | Resistor_SMD:R_0603_1608Metric | R2, R3, R7 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R8 |
| 2 | 10 u | Capacitor_SMD:C_01005_0402Metric | C3, C4 |
| 2 | 15p | Capacitor_SMD:C_01005_0402Metric | C11, C12 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 8MHZ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | LIS2DH | Package_LGA:LGA-14_2x2mm_P0.35mm_LayoutBorder3x4y | U4 |
| 1 | MSPM0G3507SPTR | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Questions
How big is the MSPM0 PCB?
It measures 56.1 × 29.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MSPM0 use?
37 parts, built around the MSPM0G3507SPTR, CH340E, LIS2DH and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MSPM0 KiCad files?
From the Ar998-max/PCB-1- repository on GitHub, at the commit this page was made from: the board is MSPM0.kicad_pcb and its schematic MSPM0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MSPM0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ar998-max before reusing the design.
Similar boards
- 2 layers54.1 × 31.8 mm
IVME OLCER
hykoser/LIS2DH-Accelerometer-Board
A custom accelerometer development board designed with KiCad and MSPM0 microcontroller.
37 parts1 - 2 layers53 × 28 mm
Mspmo baord
prashantbhandary/mspmo-baord
A compact USB-C development board for TI's MSPM0G3507 (Arm Cortex-M0+, 80 MHz, 128 KB flash, 32 KB SRAM), with an on-board USB-to-UART bridge, a 3-axis accelerometer and a Tag-Connect SWD footprint.
37 parts1 - 2 layers53.8 × 28.5 mm
MSPMO
adityajoshi2008/MSPM0-DevKit
🌐 ARM Cortex-M0+ • KiCad 10.0 • Open Source • PCB Hardware
38 partsMIT - 2 layers59.8 × 35.5 mm
PCB Tutorial
basillx1/mspm0-accelerometer-board
2-layer KiCad board: TI MSPM0 MCU + LIS2DH accelerometer, USB-C, SWD debug
37 partsMIT - 2 layers53.8 × 29.2 mm
MSPM0
benbruder/MSPM0
Design of schematic and PCB for a TI MSPM0-based MCU with all of its components.
37 parts - 2 layers50 × 30 mm
- 2 layers54 × 27 mm
TI MSPM0
cashmoneyisaac/mspm0-microcontroller-pcb
a two-layer ti mspm0g3507 board with usb-c, usb-to-uart, swd, and an i²c accelerometer. includes kicad source and manufacturing files.
40 parts