
RelaisAddierer
apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.
Transistor is an open-source printed circuit board by apxco, from the apxco/Kicad repository on GitHub. It is a 2-layer board of 152.4 × 76.2 mm with 119 parts on 366 nets, routed with 271 tracks and 8 vias.
It is built around the BC327, BC547 and 1N4148W, with the BC337, BC847 and BC846BS among its other parts. Its parts include 42 connectors, 23 capacitors, 23 transistors, 20 resistors and 4 diodes.
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C11, C13, C14, C15, C16, C17, C18, C21, C22, C23, C24, C25, C26, C27, C28 +5 |
| 18 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J13, J15, J21, J22, J23, J24, J25, J26, J27, J28, J29, J30, J31, J32, J33, J34 +2 |
| 16 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R6, R7, R10, R11, R12, R13, R16, R17, R18, R19, R22, R23, R24 |
| 8 | Conn_01x40_Pin | Connector_PinSocket_1.27mm:PinSocket_1x40_P1.27mm_Vertical | J2, J5, J37, J38, J39, J40, J41, J42 |
| 5 | BC327 | Package_TO_SOT_THT:TO-92_Inline | Q11, Q15, Q17, Q21, Q25 |
| 5 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q12, Q16, Q19, Q23 |
| 5 | Conn_01x02_Pin | Connector_PinSocket_1.27mm:PinSocket_1x02_P1.27mm_Vertical | J4, J6, J7, J8, J14 |
| 5 | Conn_01x35_Pin | Connector_PinSocket_1.27mm:PinSocket_1x35_P1.27mm_Vertical | J12, J16, J17, J19, J20 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q7, Q18, Q22 |
| 3 | Conn_01x04_Pin | Connector_PinSocket_1.27mm:PinSocket_1x04_P1.27mm_Vertical | J9, J10, J11 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 1N5405 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D3, D4 |
| 2 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q4 |
| 2 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q20, Q24 |
| 2 | C_Polarized | Capacitor_SMD:CP_Elec_6.3x5.9 | C19, C20 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1, J3 |
| 2 | R | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R14, R15 |
| 1 | 1,5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | BC846BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q13 |
| 1 | BC856BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q14 |
| 1 | BUZ11 | Package_TO_SOT_THT:TO-220-3_Vertical | Q9 |
| 1 | Conn_01x60_Pin | Connector_PinSocket_1.27mm:PinSocket_1x35_P1.27mm_Vertical | J18 |
| 1 | IRF9540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q10 |
| 1 | R_Potentiometer_Trim | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | TIP41 | Package_TO_SOT_THT:TO-220-3_Vertical | Q5 |
| 1 | TIP42 | Package_TO_SOT_THT:TO-220-3_Vertical | Q6 |
| 1 | TL431LP | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | TestPoint_2Pole | Connector_PinHeader_1.27mm:PinHeader_2x01_P1.27mm_Vertical | TP1 |

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.



eloicote/remote_omnidirectional_droid
ESP32 based freemoving drone with a camera for FPV which utilizes three omniwheels in a delta formation to move freely in 3 dimensions

edgranzella/Placa-de-Corte-TX
Circuito Impreso de la plaquetita de Corte TX que va apilada sobre el Arduino Nano de la placa Controladora de Fuentes y Carga.


profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply

promesoft/KicadJE-EuroPowerSupply
Takes a Laptop 19V input and makes +-12 and 5 v out

Markus-Fitz/Protection-board
Speaker-protection board for power amplifier.
It measures 152.4 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
119 parts, built around the BC327, BC547, 1N4148W and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the apxco/Kicad repository on GitHub, at the commit this page was made from: the board is Breadboard/Test1_Transistor/Transistor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask apxco before reusing the design.