2 layers100 × 60 mm
2 layers68.6 × 53.3 mm
Motor Controller PCB
appliedengineering/Motor-Controller-PCB- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 31
- Nets
- 41
- Pads
- 231
- Tracks, vias
- 153, 6
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Dec 2020
- Updated
- 29 Apr 2021
Overview
Motor Controller PCB is an open-source printed circuit board by appliedengineering, from the appliedengineering/Motor-Controller-PCB repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 31 parts on 41 nets, routed with 153 tracks and 6 vias.
It is built around the ARDUINO UNO R3, DS18B20-PAR+T&R and IFX007T. Its parts include 8 capacitors, 8 resistors, 3 diodes, 3 transistors and 1 IC. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
DS18B20-PAR+T&R
TO-92-312bit 3V~5.5V 750ms Single bus Temperature threshold monitoring、Low-power standby、Configurable temperature output、On-chip non-volatile parameter storage ±0.5℃ TO-92-3 Temperature Sensors ROHSMaxim Integrated (Analog Devices)Temperature Sensors
IFX007T
TO-263-7-40℃~+150℃ 250ns 250ns 7uA 8V~40V Half-Bridge MOSFET Under Voltage Protection、Over Current Protection、Short Circuit Protection、Overtemperature protection (OTP) TO-263-7 Gate Drivers ROHSInfineon TechnologiesGate Drivers
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R13, R15 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C14 |
| 2 | 10V | Diode_SMD:D_MiniMELF | D1, D3 |
| 2 | 220nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | TJ200F04M3L | Motor-Controller-PCB:TO-220SM-3_TabPin2_ThermalVias | Q2, Q3 |
| 1 | Motor-Controller-PCB:LOGO (11) | LOGO | |
| 1 | 1.47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 100µF | Capacitor_SMD:CP_Elec_10x10 | C7 |
| 1 | 10M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 39V | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 50V 1500µF | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C4 |
| 1 | Arduino_UNO_R3 | Motor-Controller-PCB:Arduino_UNO_R3_Shield_WithMountingHoles | A1 |
| 1 | DS18B20-PAR | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | IFX007T | Package_TO_SOT_SMD:TO-263-7_TabPin8 | Q1 |
| 1 | LOGO | Motor-Controller-PCB:LogoAE | G*** |
The 26 most common of 31 parts.
Questions
How big is the Motor Controller PCB PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Motor Controller PCB use?
31 parts, built around the ARDUINO UNO R3, DS18B20-PAR+T&R and IFX007T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor Controller PCB KiCad files?
From the appliedengineering/Motor-Controller-PCB repository on GitHub, at the commit this page was made from: the board is Motor-Controller-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor Controller PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask appliedengineering before reusing the design.
Similar boards
- 2 layers35.6 × 38.1 mm
Brake Controller
Autonomous-Motorsports-Purdue/AMP_PCB_Brake-Controller
PCB with brake motor controller files and documentation
28 parts - 2 layers101.6 × 63.5 mm
Dccpp pcb
trainman419/dccpp_pcb
This is the DCC++ board project. It's a relatively simple printed circuit board which integrates all of the components that are necessary for a DCC++ base station onto a single PCB, with all of the things you need, and…
70 parts - 2 layers125 × 93 mm
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50