Skip to the content
12345678

IFX007T

Infineon TechnologiesExtended

-40℃~+150℃ 250ns 250ns 7uA 8V~40V Half-Bridge MOSFET Under Voltage Protection、Over Current Protection、Short Circuit Protection、Overtemperature protection (OTP) TO-263-7 Gate Drivers ROHS

Part id
infineon/IFX007T
Category
Gate Drivers
Package
TO-263-7
Pins
8
In stock
0 at JLCPCB (C535998)
Used on
6 open-source boards

Overview

The IFX007T is a gate Driver made by Infineon Technologies in a TO-263-7 package with 8 pins. -40℃~+150℃ 250ns 250ns 7uA 8V~40V Half-Bridge MOSFET Under Voltage Protection、Over Current Protection、Short Circuit Protection、Overtemperature protection (OTP) TO-263-7 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:IFX007T, from Tinkerforge) and its footprint (Package_TO_SOT_SMD:TO-263-7_TabPin8, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C535998). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

2IN3INH6IS5SR1GND7VS4OUT8OUT
tinkerforge:IFX007TFrom Tinkerforge

Footprint

12345678
Package_TO_SOT_SMD:TO-263-7_TabPin8From KiCad's library

Pinout

8
The pins of the IFX007T
PinNameType
1GNDInput
2INInput
3INHInput
4OUTInput
5SRInput
6ISInput
7VSInput
8OUTInput

Open-source boards using it

6
  • 2 layers100 × 60 mmMotordrivershield, the printed circuit board in 3D

    Motordrivershield

    wuehr1999/lois_ecu

    General purpose ECU for robotics applications

    163 parts2MIT
  • 2 layers35.6 × 38.1 mmBrake Controller, the printed circuit board in 3D

    Brake Controller

    Autonomous-Motorsports-Purdue/AMP_PCB_Brake-Controller

    PCB with brake motor controller files and documentation

    28 parts
  • 2 layers101.6 × 63.5 mmDccpp pcb, the printed circuit board in 3D

    Dccpp pcb

    trainman419/dccpp_pcb

    This is the DCC++ board project. It's a relatively simple printed circuit board which integrates all of the components that are necessary for a DCC++ base station onto a single PCB, with all of the things you need, and…

    70 parts

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the IFX007T?

Yes. The symbol is tinkerforge:IFX007T and the footprint Package_TO_SOT_SMD:TO-263-7_TabPin8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IFX007T?

TO-263-7, with 8 pins. Its footprint is drawn on this page.

Where can I order the IFX007T?

JLCPCB lists it as part C535998, with 0 in stock; the sellers' links on this page open their listings.

What can replace the IFX007T?

Parts like it in the library: the BTN8982TA by Infineon Technologies and the BTN8982TAAUMA1 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IFX007T?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.