

- Size
- 83.2 × 69.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 70
- Pads
- 321
- Tracks, vias
- 650, 104
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Feb 2024
- Updated
- 2 Jul 2026
Overview
Shield is an open-source printed circuit board by apmarshall3, from the apmarshall3/general-purpose-robotics-shield repository on GitHub. It is a 2-layer board of 83.2 × 69.2 mm with 82 parts on 70 nets, routed with 650 tracks and 104 vias.
It is built around the LMV358, ARDUINO UNO R3 and L298P, with the LMV331TP and 2N7002DWK among its other parts. Its parts include 22 diodes, 16 capacitors, 12 connectors, 9 resistors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational AmplifierARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorisedL298P
ZIP-152 2A 4.5V~7V Yes ZIP-15 Stepper Motor Driver ROHSHANSCHIP semiconductorStepper Motor DriverLMV331TP
SOT-23-5-55℃~+125℃ 0.8uV/℃ 1 1.8V~5.5V 1pA 2pA 50uA 7V 800uV 950ns Open-drain Rail-to-rail input SOT-23-5 Comparators ROHSTECH PUBLICComparators2N7002DWK
SOT-363SOT-363 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | D | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D12, D13, D14, D15, D16, D21 |
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D17, D18, D19, D20 |
| 2 | 0R15 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN3 |
| 2 | 10k | Resistor_SMD:R_Array_Convex_4x0603 | RN2, RN4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 1 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2K5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 2N7002DWK | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | Q2 |
| 1 | 4077 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 5V | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10 |
| 1 | ADC | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J1 |
| 1 | APA102 | LED_SMD:LED_RGB_5050-6 | D22 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | BATT | Ricks:Amass_XT60PW-M_Kombifootprint | J2 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | DualPMOS | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | Q4 |
| 1 | ENC1 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J7 |
| 1 | ENC2 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J9 |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_445-030_Inline_P20.50x5.20mm_D1.30mm_Horizontal | F1 |
| 1 | I2C | footprints:Molex_KK-254_1x04_P2.54mm_Horizontal | J10 |
| 1 | L298P | footprints:SOIC127P1420X360-21N | U3 |
| 1 | LMV331 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | PWR SW | Button_Switch_THT:SW_E-Switch_EG2219_DPDT_Angled | SW1 |
| 1 | PWR SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | Q3 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | SERVO1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SERVO2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | SERVO3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | SERVO4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mm | SW2 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J4 |
| 1 | ULTRA | footprints:Molex_KK-254_1x04_P2.54mm_Horizontal | J6 |
More from apmarshall3/general-purpose-robotics-shield
1- 4 layers83.2 × 78.1 mm

Similar boards
- 2 layers100 × 88 mm

- 2 layers59.3 × 34.1 mm

Motor driver
dknueppe/motor-driver-embedded-software
Motortreiber und zugehörige Software entwickelt für das Modul Embedded Software an der FH-Münster
29 parts - 4 layers100 × 60 mm

- 2 layers172 × 230 mm

- 4 layers100 × 80 mm

- 2 layers121.5 × 115 mm

IrrigationController
alorcs/Irrigation-System-v2
The external footprints used can be found in the Imports folder.
115 partsApache-2.0 - 2 layers

- 2 layers49 × 110.5 mm

Pcb suiveur
bejaouihamza/CUSTOM_ROBOT_PCB_WITH_ESP32
Key Features 🚀 Core Components ESP32-C3-WROOM-2 – RISC-V-based MCU with WiFi 4 & Bluetooth 5 (BLE)
60 parts
Questions
How big is the Shield PCB?
It measures 83.2 × 69.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shield use?
82 parts, built around the LMV358, ARDUINO UNO R3, L298P and LMV331TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shield KiCad files?
From the apmarshall3/general-purpose-robotics-shield repository on GitHub, at the commit this page was made from: the board is PCB_V1/Shield.kicad_pcb and its schematic PCB_V1/Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask apmarshall3 before reusing the design.