
Dolphins
apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware
Fireflies is an open-source printed circuit board by apaleslimghost, from the apaleslimghost/synths repository on GitHub. It is a 2-layer board of 20.3 × 109.2 mm with 49 parts on 70 nets, routed with 477 tracks and 26 vias.
It is built around the MCP4822-E/P, TL072 and TLC5971PWP. Its parts include 19 resistors, 13 capacitors, 6 switches, 5 connectors and 4 ICs.
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware. these can be viewed on CADLAB.io.
pcbdraw populatekikitunless otherwise specified:
generally, that means you can use, edit, and make things in this repository, but please share the source if you do.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C13 |
| 7 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6, R7, R12, R13, R14, R15 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R16, R17, R18, R19 |
| 4 | AudioJack2_SwitchT | Pale Slim Ghost:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J2, J3, J4, J5 |
| 4 | ENCODER-RGB-SWITCH | Pale Slim Ghost:ENCODER_LED_3 | S1, S2, S3, S4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R10 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R11 |
| 2 | D_Zener | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | SW_Push_LED | Pale Slim Ghost:PB01-109TL | SW1, SW2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | Chordata | Pale Slim Ghost:Chordata | U2 |
| 1 | Conn_01x04 | Pale Slim Ghost:Stemma QT Qwiic JST_SH_SM04B | J1 |
| 1 | MCP4822 | Package_SO:MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | TL072 | Package_TO_SOT_SMD:SOT-23-8_Handsoldering | U1 |
| 1 | TLC5971PWP | Package_SO:HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalVias | U4 |

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

sebastianbeyer/KOSMO_braids
This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl.

promesoft/KicadJE_uP_DAC
STM32 and ATMEGA32A - Eurorack DAC MCP4822 output - Use for Sub 400Hz DDS, LFO, ADSR, Effects - and a small 555 VCO - DDS1 DDS2





It measures 20.3 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the MCP4822-E/P, TL072 and TLC5971PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the apaleslimghost/synths repository on GitHub, at the commit this page was made from: the board is eurorack/modules/fireflies/fireflies.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask apaleslimghost before reusing the design.