2 layers95 × 78 mm
2 layers35 × 24 mm
HyperLink
antsouchlos/hyperlink-hwA PCB for gathering data form CommonSense boards over bluetooth and retransmitting over wifi
- Size
- 35 × 24 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 42
- Pads
- 157
- Tracks, vias
- 262, 83
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Oct 2024
- Updated
- 20 Oct 2024
Overview
HyperLink is an open-source printed circuit board by antsouchlos, from the antsouchlos/hyperlink-hw repository on GitHub, published under the MIT licence. It is a 2-layer board of 35 × 24 mm with 46 parts on 42 nets, routed with 262 tracks and 83 vias.
It is built around the ESP32-C3, MIC5504-3.3YM5 and PESD2USB5UX-TR, with the ABM11W-40.0000MHZ-8-B1U-T3 among its other parts. Its parts include 13 capacitors, 12 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C3
QFN-32-EP(5x5)12bit 160MHz 22 3V~3.6V Others QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)
MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PESD2USB5UX-TR
TO-236AB0.47pF 11V 1nA 3.3V 4A@8/20us 5V TVS Unidirectional TO-236AB ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
ABM11W-40.0000MHZ-8-B1U-T3
SMD2016-4P-20℃~+70℃ 40MHz 40Ω 8pF ±10ppm ±10ppm SMD2016-4P Crystals ROHSAbraconCrystals
README
README.mdHyperLink
A PCB for gathering data form CommonSense boards over bluetooth and retransmitting over wifi.
After cloning, the libraries can be downloaded using
$ git submodule update --initPCB
Schematic
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R9, R10 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C15, C16, C17 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C7, C18 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C12 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1.8nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2108838-1 | encyclopedia_galactica:2108838-1 | AE1 |
| 1 | 2n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 3p9 | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 4p5 | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 500R | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ABM11W-40.0000MHZ-8-B1U-T3 | encyclopedia_galactica:ABM11W-30.0000MHZ-7-D1X-T3 | Y1 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | ESP32-C3 | encyclopedia_galactica:QFN32_5X5_EXP | U1 |
| 1 | GPIO2 | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | GPIO8 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | GPIO9 | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | PESD2USB5UXT | Package_TO_SOT_SMD:TSOT-23 | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | encyclopedia_galactica:USB4105-GF-A | J1 |
Questions
How big is the HyperLink PCB?
It measures 35 × 24 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HyperLink use?
46 parts, built around the ESP32-C3, MIC5504-3.3YM5, PESD2USB5UX-TR and ABM11W-40.0000MHZ-8-B1U-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HyperLink KiCad files?
From the antsouchlos/hyperlink-hw repository on GitHub, at the commit this page was made from: the board is HyperLink.kicad_pcb and its schematic HyperLink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HyperLink design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers100 × 220 mm
- 4 layers150 × 115 mm
Usb controlled debug hub 2a
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
190 parts3MIT - 4 layers85 × 56 mm
- 4 layers90 × 50 mm
Greenmobi bms
G-Pereira/greenmobi-bms
A VESC compatible battery management system
141 parts31CERN-OHL-S-2.0 - 8 layers35 × 35 mm
OpenAIO
OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.
343 parts19CERN-OHL-S-2.0 - 4 layers40 × 30 mm
- 2 layers30 × 18 mm
