2 layers100 × 58 mm
2 layers56 × 96 mm
Pipico vga
antonloof/picovgaVGA output for a Raspberry pi PICO
- Size
- 56 × 96 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 81
- Pads
- 316
- Tracks, vias
- 434, 50
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Feb 2021
- Updated
- 4 May 2022
Overview
Pipico vga is an open-source printed circuit board by antonloof, from the antonloof/picovga repository on GitHub. It is a 2-layer board of 56 × 96 mm with 74 parts on 81 nets, routed with 434 tracks and 50 vias.
It is built around the 74LVC162244ADGVJ, AP62250WU and PI3C3305LE, with the BZT52C5V1S, MC36232 and RSX301L-30TE25 among its other parts. Its parts include 36 resistors, 11 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
6
74LVC162244ADGVJ
TSSOP-48-4.4mm-40℃~+125℃ 1 1.2V~3.6V 12mA 12mA 16 2.7ns@3.3V,50pF 74LVC 80uA Schmitt trigger Tri-State Unidirectional TSSOP-48-4.4mm Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
AP62250WU
TSOT-26-40℃~+85℃ 1 1.3MHz 155uA 2.5A 4.2V~18V 800mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
PI3C3305LE
TSSOP-8-40℃~+85℃ 0.25ns@3.3V,50pF 2.5V~3.3V 260uA Single Supply TSSOP-8 Signal Switches, Multiplexers, Decoders ROHSDiodes IncorporatedSignal Switches, Multiplexers, Decoders
BZT52C5V1S
SOD-323-65℃~+150℃ 1 Independent 1uA 200mW 4.8V~5.4V 480Ω 5.1V 60Ω SOD-323 Zener Diodes ROHSDiodes IncorporatedZener DiodesMC36232
-UncategorisedMulticomp
RSX301L-30TE25
SMA(DO-214AC)1 Independent 200uA@30V 30V 3A 420mV@3A 70A SMA(DO-214AC) Schottky Diodes ROHSROHM SemiconductorSchottky Diodes
README
README.mdpicovga
VGA output for a Raspberry pi PICO
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 536 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R19, R20, R21, R22, R23 |
| 12 | 270 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9, R15, R16, R17, R18, R24, R25, R26, R27 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C6, C11 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30, R32, R33, R34 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28, R29, R35, R36 |
| 3 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | GND1, GND2, GND3 |
| 2 | 22u 5v | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | RJE37-188-2410 | Connector_RJ:RJ45_Amphenol_RJHSE538X | J1, J4 |
| 1 | 10u 18v | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 2u2 | good_things:smd_inductor_0806_2016metric | L1 |
| 1 | 52k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 5v | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | 74LVC162244ADGVJ | good_things:SOIC-48 | U2 |
| 1 | AP62250 | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | BZT52C5V1+ | Diode_SMD:D_SOD-123 | D1 |
| 1 | CPH3350-TL-W | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3 |
| 1 | DB15_Male_HighDensity_MountingHoles | good_things:DSUB-15-HDEX15SNT | J2 |
| 1 | MC36232 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | PI3C3305LE | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | RSX301L-30TE25 | good_things:SOD-106 | D2 |
| 1 | blue | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | green | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | hsync | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | red | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | vsync | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
More from antonloof/picovga
1Similar boards
- 2 layers86 × 78.3 mm
- 2 layers
Eta rotary coffe dispenser
antonloof/eta_rotary_coffe_dispenser
Dagny 2.0. Även kännd som ETAs kaffedispenser med gammal teknik
117 parts - 2 layers49.1 × 49.1 mm
Roborock CPAP
jniebuhr/roborock-pcb
This repository contains a custom PCB for use with the awesome work at Roborock CPAP. The PCB shields the controller board from any back flow that might occur from the brushless controller.
31 parts34 - 2 layers
- 2 layers88.2 × 92 mm
Piezo stage controller
antonloof/piezo_stage_controller
if I finish it that is ... outputs 0-10V on 6 outputs to drive 2x MDT693B (thorlabs)
136 parts - 2 layers228.6 × 152.4 mm
- 2 layers48.3 × 40.6 mm
- 4 layers75 × 38.6 mm
HuffAndPuff
dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.
149 parts
Questions
How big is the Pipico vga PCB?
It measures 56 × 96 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pipico vga use?
74 parts, built around the 74LVC162244ADGVJ, AP62250WU, PI3C3305LE and BZT52C5V1S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pipico vga KiCad files?
From the antonloof/picovga repository on GitHub, at the commit this page was made from: the board is kicad/pipico_vga.kicad_pcb and its schematic kicad/pipico_vga.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pipico vga design in my own project?
Its repository states no licence, so its author keeps all rights: ask antonloof before reusing the design.