2 layers
2 layers88.2 × 92 mm
Piezo stage controller
antonloof/piezo_stage_controllerif I finish it that is ... outputs 0-10V on 6 outputs to drive 2x MDT693B (thorlabs)
- Size
- 88.2 × 92 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 136
- Nets
- 129
- Pads
- 459
- Tracks, vias
- 628, 59
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Feb 2022
- Updated
- 2 Apr 2022
Overview
Piezo stage controller is an open-source printed circuit board by antonloof, from the antonloof/piezo_stage_controller repository on GitHub. It is a 2-layer board of 88.2 × 92 mm with 136 parts on 129 nets, routed with 628 tracks and 59 vias.
It is built around the LMC6042IM, CS42438-CMZ and L7805, with the HEF4053BT, CPH3350-TL-H and RSX301L-30TE25 among its other parts. Its parts include 52 capacitors, 49 resistors, 10 ICs, 5 diodes and 4 connectors. It belongs with the RP2040 boards of this library.
Main components
6
LMC6042IM
SOIC-8-40℃~+85℃ 100kHz 2 20V/ms 22mA 2pA 4.5V~15.5V 45uA 4pA 6.3uV/℃ 60dB 83nV/√Hz@1kHz 9mV Rail-to-rail output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
CS42438-CMZ
MQFP-52(10x10)-10℃~+70℃ 3.14V~5.25V、3.14V~3.47V 48kHz~192kHz Encoder/decoder On-chip digital gain、Mute control Serial MQFP-52(10x10) Audio Interface ICs ROHSCirrus LogicAudio Interface ICs
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
HEF4053BT
SO-16-40℃~+125℃ 2:1 3 3V~15V 40MHz 5ns 80Ω SOIC-16 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, Multiplexers
CPH3350-TL-H
CPH-3-55℃~+150℃ 1 P-Channel 1.3V 1W 20V 375pF 3A 4.6nC@4.5V 58pF 77pF 83mΩ@4.5V P-Channel CPH-3 MOSFETs ROHSonsemiMOSFETs
RSX301L-30TE25
SMA(DO-214AC)1 Independent 200uA@30V 30V 3A 420mV@3A 70A SMA(DO-214AC) Schottky Diodes ROHSROHM SemiconductorSchottky Diodes
README
readme.mda piezeo controller
if I finish it that is ... outputs 0-10V on 6 outputs to drive 2x MDT693B (thorlabs)
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C102, C103, C108, C109, C111, C112, C113, C114, C115, C204, C205, C207, C208, C210, C211, C302 +6 |
| 17 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R101, R102, R103, R104, R105, R108, R109, R110, R111, R112, R113, R114, R115, R310, R410, R510 +1 |
| 13 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R106, R107, R201, R307, R308, R407, R408, R503, R505, R506, R507, R508, R509 |
| 8 | BLM18AG102SN1D | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB101, FB201, FB202, FB203, FB301, FB401, FB501, FB502 |
| 6 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C101, C107, C301, C401, C501, C505 |
| 5 | 10u 16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C202, C203, C206, C209, C212 |
| 4 | 3v9 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D501, D502, D503, D504 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H101, H102, H103, H104 |
| 4 | lmc6042 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U301, U401, U501, U503 |
| 3 | Conn_Coaxial | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J301, J401, J501 |
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT201, NT202, NT203 |
| 2 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C308, C408 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C104, C105 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C502, C507 |
| 2 | 1k65 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301, R401 |
| 2 | 1k87 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R303, R403 |
| 2 | 1n2 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C306, C406 |
| 2 | 1n8 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C303, C403 |
| 2 | 21k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R309, R409 |
| 2 | 22u DNM | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C305, C405 |
| 2 | 2k94 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R305, R405 |
| 2 | 330u | Capacitor_SMD:CP_Elec_10x10 | C110, C201 |
| 2 | 390p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C307, C407 |
| 2 | 4k75 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R306, R406 |
| 2 | 5k49 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R302, R402 |
| 2 | 5n6 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C304, C404 |
| 2 | 887 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R304, R404 |
| 2 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U202, U203 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R502 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R501 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R504 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C106 |
| 1 | 750 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R203 |
| 1 | AZ1117-ADJ | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U201 |
| 1 | CPH3350 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q201 |
| 1 | CS42438 | good_things:QFP-52_14x14_Pitch0.65mm | U102 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J202 |
| 1 | HEF4053B | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U502 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U101 |
| 1 | RSX301L-30TE25 | good_things:SOD-106 | D101 |
Similar boards
- 2 layers86 × 78.3 mm
- 2 layers
Eta rotary coffe dispenser
antonloof/eta_rotary_coffe_dispenser
Dagny 2.0. Även kännd som ETAs kaffedispenser med gammal teknik
117 parts - 2 layers56 × 96 mm
- 2 layers40.6 × 110 mm
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers59.7 × 57.5 mm
- 2 layers90.8 × 35.6 mm
ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0
Questions
How big is the Piezo stage controller PCB?
It measures 88.2 × 92 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Piezo stage controller use?
136 parts, built around the LMC6042IM, CS42438-CMZ, L7805 and HEF4053BT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piezo stage controller KiCad files?
From the antonloof/piezo_stage_controller repository on GitHub, at the commit this page was made from: the board is board/board.kicad_pcb and its schematic board/a_input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piezo stage controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask antonloof before reusing the design.